How to Update Dlink Router Firmware? A Thorough Guide

Dlink routers have always been the sheer winner in this global market. It can connect more than five devices at a time and also maintain the speed as well. Therefore, it is necessary to update the firmware of the router on a regular basis so that it can help to improve the connectivity, and boosts up the performance. In case, you are not aware of how to update Dlink router firmware then read this article thoroughly.

Also looking for the perfect hacks that will help you? Here, in this guide, you will find the most proficient methods that are tested by the experts. Thus, have a deep look at the entire section of the document and mitigate your queries as early as possible.

How to Update Dlink Router Firmware?

Updating the router’s firmware will not be a difficult task for you if you know the basic fundamentals. Moreover, if you update the firmware regularly then it might help you to run the router smoothly. Keeping that in the mind we are going to illustrate some practical methods that will help you to update the firmware of your Dlink router.

Method 1: Locate IPv4 Default Gateway Entry

This method is quite lengthy but at the same time, it is one of the most effective ones for updating the firmware of your Dlink router. First of all, you need to verify the router for the address. Afterward, access your computer for displaying the IP address in the web browser you are using. But if you could not find the option, then keep following the steps mentioned underneath:

  1. At first, tap on the start menu and navigate to the Search box.
  2. After that, select “Network Status” and then click on the “View network status and tasks” option as well.
  3. Then, you can see the connection list. But you have to tick on the current connection that is found at the right side of the screen.
  4. Now, choose Ethernet or WiFi and also the network connection that is connected with your router.
  5. Then, select Details by clicking on it.
  6. After that, navigate to the “IPv4 Default Gateway entry” and look at the IP address as well.
  7. Finally, check if you successfully updated the router’s firmware or not.

Method 2: By Running the .exe File

In case the first method is not applicable for you then, you try out this method. First of all, visit www.Dlink.com/support and tap on the Enter button. After that, go to the Search box and there you have to put the model number of the router. If you find a drop-down menu then, choose the desired router mode. But if you are unable to see it, then choose a product category for getting the model name. Then, tap on the Firmware and Software Downloads and choose the firmware version that you want to download. Next, tap on the Download icon and let it download completely. Then, you have to unzip the downloaded file and execute the .exe file. Go through the instructions that are showing on the screen to complete the Dlink router firmware update process.

Final Words

We assume that the above two methods are helpful to know how to update Dlink router firmware. But in case if you face any sort of difficulties while performing the process, then you can get in touch with the experts. If the article is profitable for you then in order to do the update then write your comment in the feedback box.