For Quick Assistance, Call our Router Support Number now @ :

All posts by admin

For Quick Assistance, Call our Router Support Number now @ :

01Jul/19

Premium Hacks On How To Reset TP-Link Router

TP-Link is one of the best routers available in this professional market. It holds its position due to its exceptional features and superior connectivity. If you purchase a TP-Link router and tired of searching how to reset the TP-Link router, then you have arrived at the right page. 

Here in this article, we are going to present some of the easy techniques that can help you to reset the TP-Link router. Hence, you are advised to go through the guide given below. 

Step-by-Step Guidance on How to Reset the TP-Link Router:

First, you have to turn the TP-Link router on. Then, attach the ethernet cable between the blue internet port and port 1 of your TP-Link router. Connect your computer with any of the yellow Ethernet port. Then, turn on the computer. After that, have a glance at the steps stated below: 

Set up the Computer

Usually, the computer will set up to obtain the IP settings automatically. But, if it’s not, then you should perform the steps given below: 

  1. At first, move the cursor to the bottom left corner of the screen and tap on the Start menu. 
  2. Tap on the Control Panel option. 
  3. Navigate to the ‘Network and Internet’ section and tap on the Network Connections option.
  4. Choose the Ethernet option from the current and tap on the ‘Properties’ option.
  5. Next, you have to tap on the ‘Internet Protocol Version 4.’ Look at the bottom right side of the screen and tap on the Properties option. 
  6. Go to the General tab. Now, you have to confirm that it is set to ‘Obtain DNS Server address automatically’ and ‘Obtain an IP address automatically.’
  7. Click twice on the Ethernet option and choose the ‘Details’ from the list to check if you have already set a dynamic IP address. Here, you will see that the IP address starts with 192.168.0.

Set up the Router

After setting the computer, you should go through the steps given below: 

Step 1

First, launch the default web browser of your computer and move the cursor to the Address bar. Then, type ‘192.168.0.1’ and hit the Enter key from the keyboard to load the Address bar. 

Step 2

Now, it will open the login page. Here you have to type the login credentials like the username and password in the specific field. ‘Admin’ is the username and password for most of the TP-Link router by default. Click on the ‘Log in’ button. 

Step 3

Once you logged into the device, it will prompt to create a strong password for your device. After successfully changing the default username and password, you will be redirected to the Quick Setup page. 

Now, you have to set the Time Zone. Choose the ‘GMT+08:00’ option from the list. Tap on the ‘Next’ button to proceed further. 

Step 4

Thereafter, you have to choose the type of your internet connection. Choose the ‘PPPoE’ option and tap on the ‘Next’ button to proceed further. Now, you have to type the username and the password provided by your internet service provider in the particular box. Click on the Next button.  

Step 5

To change the settings of the broadcast network, have a look at the steps mentioned below: 

  1. First, check the box that prompts ‘Enable Wireless Radio.’ It will enable the radio.
  2. Now, you will see the SSID or Network Name when you going to connect the Wi-Fi network.
  3. After that, you have to set a strong password. Tap on the ‘Password’ box. Type your desired password. Enter the same password on the ‘Verify Password’ box. Then, tap on the ‘Confirm’ button.  
  4. Now, if you wish to visible the Wi-Fi network, then you should leave the ‘Hide SSID’ box unchecked.  
  5. Now, tap on the Next button to proceed further.

Step 6

As a result, it will show you a review of the information that you configured recently. If everything seems correct, then you can tap on the ‘Save’ button. Else, if you want to change something more, then move the cursor to the upper left corner of the screen and tap on the ‘Back’ button.

Step 7

Now, it will transfer you to the next window. Tap on the ‘Log In Later’ option. Next, it will prompt you that you have finished the Quick Setup Procedure. Tap on the ‘Finish’ button.

Step 8

As a result, it will open the Network map. Navigate to the Advanced Tab and select the ‘Network’ category from the current window. Tap on the ‘Internet’ option. Now, you have to set the size between MTU to 1492. Tap on the Save button.

Step 9

As a result, it will deactivate the NAT Boost. Again, go to the Advanced Tab and tap on the ‘System Tools’ option. Now, you have to untick the box that prompts ‘NAT Boost.’ After that, tap on the Save option.

Step 10

It will restart the router. Further, if you wish to restart, tap on the OK button

Step 11

After restarting the router, go to the left pane of the screen and tap on the Advanced tab. Next, go to the ‘System Tools’ section and tap on the ‘Traffic Statistics’ option. Then, you have to turn it on. Tap on the Save button. 

Now. you have successfully completed the setup procedure of the TP-Link router.  

Final Recommendation

In the above guide, we have discussed some of the easiest steps to reset the TP-Link router. We hope if you perform the above steps in their given order, then it will surely help you to ease up your pain. 

After successfully performing the above ways, if you still face any kind of trouble, then connect with a tech expert. In addition, you can also share your queries and valuable feedback through the comment box given at the end of this post. 

01Jul/19

Troubleshoot And Fix TP-Link Error Code 18005 With Easy Hacks

Error code 18005 is a common problem for almost all TP-link router users. This error notification mainly appears in your system because of Windows corrupted system files. Otherwise, the problem might also occur due to the outdated firmware version in the system or might be because of the hardware issue with the TP-link devices. 

When this error notification appears, it interrupts you from proper using of the TP-link device and hampers your work. If you are dealing with this kind of issue while working with your TP-link devices and looking for solutions, then you must go through this article. 

Through this article, we are going to present all the possible solutions that can help you to fix your problem with TP-link error code 18005

Know How to Fix TP-Link Error Code 18005 Easily with Simple Steps:

Here’s how to fix TP-Link error code 18005 with some easy fixes. In this part of the article, we are going to discuss the steps that can help you to fix the problem with error code 18005. Follow the steps listed below and fix the problem oh your own. 

Fix 1: Uninstall and Reinstall the Firmware 

As we have mentioned that the problem might occur due to the installation of the wrong firmware. So, you should uninstall the previous one, and then reinstall the updated version of the firmware. If you need to uninstall and reinstall the firmware, then the following steps will help you to do that.

  1. At first, open your preferred web browser.
  2. Then, look for an updated version of the firmware.
  3. Thereafter, download the firmware in your computer. 
  4. After that, double click on the firmware icon and choose a location where you want to install the firmware. 
  5. Then, click on the OK button. After installing the newer version of the firmware, the earlier version will not exist in the system. 

Fix 2: Run Windows System File Checker

You can get rid of the problem while using the System File Checker or performing the SFC scan in your computer. The steps which are mentioned in the following part of the article will help you to run the System File Checker in your Windows operating system. Go through the steps.

  1. At first, turn on your computer and press the Windows logo key from your keyboard. This will help you to open the Start menu in your system. Otherwise, you can move your cursor to the bottom of the left side of your computer screen and click on the Start button. 
  2. After that, write down command prompt or cmd in the search bar.
  3. Then, a list of the menu will appear on your screen. After that, right-click on the Command prompt option from the appearing list of results. 
  4. Thereafter, click on the Run as Administrator option and enter your provided password. Then, type SFC /scannow in the Command Prompt window and hit the Enter button.
  5. Now, wait for a few minutes to complete the procedure and check if the problem is resolved or not.

Alternative Method:

If you fail to perform the above methods, then you should try this alternative method while using the Windows installation disc. It will help you to fix your problem with error code 18005. So, let’s move on to the steps which are next to you.

  1. At first, insert a Windows installation disk in the system and restart your computer. 
  2. After that, press any of the keys from your keyboard to boot up your system.
  3. Then, select the keyboard layout, time and language in your computer.
  4. Thereafter, click on the Next button and select the Repair your computer option.
  5. At the next step, click on the Troubleshoot option and choose the Advanced options.
  6. Now, click on the Command Prompt and write down
    SFC /scannow /offbootdir=c:\ /offwindir=c:\windows
  7. Then, hit the Enter button from your keyboard and verify your system to check if the problem is resolved or not.

Summing Up

Through this article, we have tried to provide you all the possible solutions that can help you to fix your problem with TP-link error code 18005. Try the steps that we have mentioned in this article and get rid of the problem on your own. 

If you have any more queries regarding this topic, then you can leave a comment down to the comment section below. 

01Jul/19

Complete Guidelines On How To Update Router Firmware TP-Link

Updating the router firmware is one of the most important tasks which keep the system content secure from the hackers. In addition, the firmware update also solves many of the common problems of the router. 

If the process of how to update router firmware TP-Link is not known to you, then you can go through the content of this article. This article will guide you with the complete information to the TP-Link router firmware update process. So, check this article sincerely and entirely till to the end.

The common problems arise during the TP-Link firmware update process are as follows: a) Forgot the login password of the TP-Link router; b) Incomplete download of the TP-Link router firmware; c) Sudden power-cut during the router firmware updating process.

How to Update Router Firmware TP-Link: Complete Steps

Are you looking for the genuine steps of how to update router firmware TP-Link? Then, you are in the right article. In this section, you will get to learn the complete methodology of the TP-Link router update process. So, check the below sections by paying complete attention.

Step 1: Verify the Details of the TP-Link Router

The first stage to begin the TP-Link router firmware update process is to know the details of your TP-Link router. Listed below are the details which you need to be verified.

  • Model Number
  • Hardware Version

You will check out these above-said details from the sticker which is attached to your TP-Link router’s body. Generally, the information sticker is attached at the down or the rare portion of the router. After knowing these details, continue with the further steps as below to update the TP-Link router firmware successfully.

Step 2: Download the Latest TP-Link Router Firmware 

The second stage to progress the router firmware update process is that you need to download the latest version of the firmware for TP-Link router from its official website. The complete process for this step is listed below.

Launch a browser on your PC and wait until the browser page gets loaded completely. Next, make sure that the internet is connected with your PC. After that, with the help of the browser, navigate to the firmware download page of the TP-Link router. On the TP-Link router firmware download page, follow these steps below to download the latest TP-Link router firmware successfully.

  1. At first, from the TP-Link router firmware download page, click on the “Support” link which is present at the top of the window.
  2. Next, scroll down the window and select the “Download Center” option.
  3. Further, on the Download Center window, you need to keep the “Type:” bar as it was, that is “All”. Then type the model number of your router on the “Model Number” field. You can get this from the information sticker of the router. 
  4. After performing all these above steps, at the below portion of this window, you will get a search result, click on that. This will navigate you to the Download page of the TP-Link router model which you have searched for. Here, you need to choose the hardware version of the router you are using, and that you get on the information sticker on the router’s body.
  • Note: If there is no information on the router information sticker, then it means that you need to select the V1 option for the “Please choose hardware version” field.
  1. Next, scroll down the window and select the firmware file from the available options to download. That’s all.

Step 3: Check the IP Address of your TP-Link Router

If you are aware of your TP-Link router IP address, then you can skip this step. Otherwise, follow the below steps to know the IP address of the router. It is necessary to proceed with the further instructions of the update router firmware process.

  1. Firstly, press down the Windows and the letter R button simultaneously to open the Run bar window.
  2. Ensure that no command is already present on the Run bar and if you find any, then by using the Backspace key remove that.
  3. After that, on the Run bar, type “cmd” without using the quotations.
  4. Next, click on OK/ hit the Enter button to open the Command Prompt window.
  5. Then, on the Command Prompt window, type “ipconfig” without the quotations.
  6. After that, press down the Enter button to execute the ipconfig command.
  7. Next, from the open list on the Command Prompt window, navigate to the Default Gateway section.
  8. Note down the number which is present beside to Default Gateway, that is, is the IP address of the TP-Link router.

Step 4: LogIn into your TP-Link Account After Extracting the Downloaded. Zip File (TP-Link Firmware)

Now, the third stage is extracting the firmware from the downloaded. ZIP file. Next, open a browser on your PC and using it, login to your TP-Link router account. The steps that you need to follow to login into your TP-Link account are listed below:

  1. At the address bar of your browser, enter the IP address of the TP-Link router.
  2. Next, tap the Enter button.
  3. After that, as the login page of the TP-Link router opens, you will get two different bar and they are as follows:
  • Username
  • Password
  1. In the place of the username, you need to enter “admin”. Whereas, in the field of the password, you need to enter “admin” again. But both must be in lower case and did not use the quotations as it is here, to make you identify the detail. 

You need to use the said information if you have not changed the username and the password earlier. And in case, if you have changed the information, then you need to use that information only to login into your TP-Link account.

Note: If you have forgotten the changed password, then you need to follow the hard reset process to revert the router back into the default settings.

  1. After entering the appropriate username and password in their respective fields, click on the Login button to log in into your TP-Link account.
  2. Next, follow the further steps to complete the how to update the router firmware TP-Link process.

Step 5: Upgrade Firmware

In the fourth stage, click on the “Advanced” option under your TP-Link account. Then, click on “System Tools”. After that, select the Firmware Upgrade option. After following these instructions, you will get the Firmware Upgrade window open. Here, click on the “Browse” button. 

Further, by using the pop-up window, navigate to the extracted (downloaded Tp-Link router firmware) .Zip file. And then, click on Open. After you load the file in the File section, click on the “Upgrade” button. Now, wait, until the update process of the TP-Link router is done successfully. 

When the update is over, you will get the successful message on the TP-Link screen. Then, it is advised to restart your PC to get the smooth internet connection. Hopefully, after following these steps above, you will get the success in implementing the router firmware TP-Link update process efficiently.

All these are about the how to update the router firmware TP-Link process. Hopefully, after you go through it thoroughly, you will not face any issue in following the firmware update process of the router.