Monthly Archives: May 2019

12May/19

Resolve Belkin Router Not Working Issue With Effective Tech-Hacks

Belkin is one of the leading router manufacturing brand available in the global market. However, the Belkin router is not completely free from technical glitches just like other router brands.  Among them, the Belkin router not working is one of the most critical error encountered by various users. This issue not only appears with the updated router but also can occur with your brand Belkin router. Once the Belkin router stops working, it restricts you from experiencing a smooth internet connection.

If you are in the same situation, then nothing to get worried. Here, in this article, we will be going to discuss various information about this problem along with the fixes. Those fixes will help you to get rid of this within a short span of time. Therefore, take a glimpse below in order to recognize the principal reasons behind this issue.

Belkin Router Not Working? Know the Predictable Reasons:

There can be various reason for encountering Belkin router not working. But, we have only mentioned the obvious points. Therefore, have a look at the foremost reasons in order to get a proficient solution afterward:

Connection Error:

Sometimes, Belkin router not working situation might refer to the unexpected breakdown of internet connectivity. This issue is linked to the connection error. In such situations, you have to check your internet connection. If you are connected with a poor internet connection, then try to connect with a trustworthy and strong internet connection.

Interruptions:

If you are connected with unstable internet connectivity, as well as, you encounter interruption, then this might be another potential cause behind Belkin router not working problem. Additionally, if there is a problem with the login procedure for the Belkin router, then you might come across this same situation.

Corrupted Firmware:

Corrupted Firmware is another highlighting factor that might be responsible for this Belkin router not working situation. However, Firmware related issues can be seen in the outdated Belkin router. Actually, the firmware of the router gets outdated or corrupted after a certain period of time. Therefore, you can encounter that your Belkin router is not working. So, you always require to update the firmware time-to-time.

Hardware Related Issues:

If there is an issue with the LED light of your Belkin router or any kind of hardware associated issues within the router, then you can encounter the Belkin router not working issue. At this point, you have to visit the login page of the Belkin router in order to verify the online status of the router

These are the principal cause behind encountering Belkin router not working. But, no matter what are causes of this error, once you get stuck with such issue, you need to solve the matter as soon as possible. So, without further delay lets proceed to the next section and resolve this issue in no time.

Resolve Belkin Router Not Working Issue with Amazing Hacks:

Now, you must be familiar with the root causes behind the Belkin router related issue. But, despite the multiple reasons, you can deal with this issue by following the troubleshooting methods as given in the below section:

Step 1:

If your Belkin router is placed inside an enclosed place like cabinet, then primarily, remove it from there. And then, you need to set the Belkin router closer to the Computer in a centralized position. Now, verify, if the broadcast connection becomes stable or not. After that, remove the router. If you prefer, then you can power off the 2.4 GHz wireless Bluetooth device, currently running closer to the network. This will restrict the broadcast signal coming from the Belkin router. Next, you have to locate the small reset slot which is on the back edge of the Belkin router.

Step 2:

Thereafter, you require to unfold a paper clip and then enter the end part of the clip inside the reset slot in order to press the Reset button on the router. Now, hold the clip inside the slot for about a few minutes. This process will reset all the options of the Belkin router to its factory default condition. Here, navigate to the Web browser and then open the setup page of the Belkin router. Once the Belkin router’s setup page opens, enter 192.168.0.1. Now, you need to enter the login credentials. You can write “Admin” in the Username field. After entering the login credentials, hit the Enter button or click on the OK button. Here, you require to leave the password section blank.

Step 3:

Now, navigate to the “Setup Wizard” icon and locate the “Launch Internet Connection Setup Wizard” button. Once you locate this option, simply tap on it. Here, you should enter a new password for your Belkin router. Therefore, in the text box field, enter a new password and then hit the Next button to proceed further. Afterward, you have to follow the on-screen prompts in order to choose the Time Zone. Now, click on the Next button. Then, press the OK button in order to apply the new changes. After that, navigate to the Web page of the Belkin router.

Step 4:

Thereafter, click on the “See All Products” button and select the link based on the wireless Belkin router’s model. Now, tap on the “Support Resources” button. Next, click on the “Firmware” from the menu list. Here, you have to press the “Download Now” button in order to install the latest version of router firmware. After that, go back to the main menu of the router by entering the web address 192.168.0.1 into the search field. Now, on the Username section “Admin” and press the Enter button. After that, enter the newly created password in a particular field and click on the OK button.

Step 5:

Next, go to the Tools section and select the option “Firmware.” Then, navigate to the “Browse” tab and choose the firmware file name that you have downloaded earlier. Now, tap on the Open option. Next, choose the “Save Settings” option. This process will update the firmware of the Belkin wireless router. Finally, you can move the cursor to the right lower side of the display and tap on the “Network” icon. Lastly, write the name of the Belkin router in order to connect to the internet.

Finally…

In the above guidelines, we have mentioned some of the reliable troubleshooting steps to resolve the Belkin router not working problem. After performing the above steps, it will help you to put an end to this issue. But, if you have an additional query regarding this issue, then you can post your query in the feedback section below. On the other hand, you can seek help from a tech-savvy person.

11May/19

Resolve Linksys Authentication Error With Amazing Tips And Tricks

A router is a common networking device or gateway that exchanges packets of data between various device networks. Often it is used as a traffic detecting tool to perceive internet traffic. Therefore, if we talk about durability and high performance, doubtlessly Linksys is one of the best. But, at times, you might encounter certain glitches while using this router. The most annoying issues that a number of Linksys users face is the Linksys authentication error. This problem generally occurs when you enter a wrong or incorrect password while configuring the Linksys router. Besides, there can be some other reasons as well that led to this problem of your router.

If you also face this same issue with your Linksys router, then you can follow this entire article. Here, in this article, we will be going to mention “how to resolve the Linksys router’s authentication error?” But, before we proceed with the troubleshooting section, take a glimpse at the below section where you will get to know “Why Linksys authentication issue occurs?”

What are the Possible Factors Responsible for the Linksys Router Authentication Error?

There are multiple factors that are responsible for the Linksys authentication error. But, most of the time, such kind of router authentication error occurs due to the poor internet connection. Therefore, if you are connected with an unstable internet connection, then you will definitely face the Linksys authentication error. Besides, there can be a problem with the wireless network routers also. This issue can also occur if you have entered a wrong username and password. Sometimes, such kind of authentication problem appears when network configuration related issues occurred.

A majority of users have reported that they find issues while installing the router in a new device. And this situation leads to Linksys authentication error. At times, link establishing error can also responsible for the issue. These are some of the basic reasons behind this error. But, there are some other reasons as well. However, regardless of the causes, once you get stuck with such an authentication-related issue, you must resolve this error as soon as possible. Hence, without wasting more time, let’s proceed to the part dealing with the solutions.

Effective Methods of Getting Rid of Linksys Authentication Error

Here, in this section of the article, you will get some of the simple hacks that you can try to resolve the Linksys authentication error. We also recommended you to follow the under mentioned steps in the same order we have instructed in order to get the best results possible. So, try the following procedures.

Procedure 1: Reset the WiFi Connection

As a first and foremost procedure, you have to reset the WiFi connection. To do so, carry out the steps that comes next:

Step 1: Primarily, you have to navigate to the Settings and then tap on the Connections button. Here, you require to check that the connection of the WifI is OK or not. Thereafter, select the “Forget Network” option in order to get the new network.

Step 2: Now, you might be prompted for your registered email address where it will send the new password. Therefore, simply enter your registered email address and follow further guidelines in order to complete the resetting process.

Once you perform all the above steps, resetting the WiFi connection will be securely done. This setting process might some time to finish, therefore, wait for a few minutes and the WiFi connection will be properly reset.

Procedure 2: Use the Static IP in the State of DCHP

After resetting the WiFi connection, you have to use the static IP in the state of DCHP. To proceed with this method, follow the below-highlighted steps:

Step 1: Firstly, you need to go to the Settings section and then, locate the “Wireless And Networks” option. Once you find it, simply tap on it. After that, select the Menu button and then click on the “Advanced” option.

Step 2: After performing the action, you require to select the static IP and then, hit the OK button in order to save the new changes. Lastly, close all the windows.

After performing the above two procedures, hopefully, Linksys authentication error will be gone. But, in case, you still encounter the same authentication error in your Linksys router, then you might require to configure your Linksys router.

Reliable Steps to Configure the Linksys Router

For resolving Linksys authentication error, you need to configure the Linksys router you are using. In order to configure it follow the below-mentioned points:

Step @1: Access the Configuration Menu

When you want to configure your Linksys router, you require to connect it through an Ethernet cable. If you are using a wireless network, then simply launch a browser and then write the address of the Linksys router in the address bar. The default address of the Linksys router is 192.168.1.1. In this way, you can access the configuration menu.

Step @2: Write the Username and Password

Whenever you are attempting to access your router with the web, you will be prompted to enter the Username and Password of the router. At this pit, you need to enter the current ID and password of your router. If you forget the ID mad password then you can easily locate them through the factory resetting of the device. Thereafter, you need to  search for the router model online through this you can get your ID and password

Step @ 3: Try to Use the Configuration Software

Now, most of the Linksys routers come with some installation CD in order to configure and install the router. This will allow you to reset the settings. However, here, you required to enter the credentials to configure this. Once you launch the configuration software, the browser menu will same as before the configuration.

Step @4: Provide the Network Name

Now, you have to navigate to the wireless settings and then check if there is a Wireless Network Name (SSID) or not. In this section, you require to put the correct name of your Linksys router and enter the accurate password. In case, you didn’t know the name of the network, then you can put the model number like the name of the router. As an alternative way, you can enable the suggestions of the WiFi networks, it might help you.

Step @5: Turn on the Broadcast

In order to configure the Linksys router, you have to ensure that you have turned on the wireless broadcast in the wireless Broeacase settings menu. Once you enable the Broadcast, hit the Apply Chmegs button in order to save the new changes. Furthermore, you have to click on the OK button to confirm the process.

Step @6: Reset the Wireless Network

If you still face Linksys authentication error, then you can try this step. The wireless network begins from the DCHP and ends with the static IP address. Therefore, in order to reset the wireless network, you have to tap on the Network button. After that, select the Advanced option Next, you will observe the IP address field. Simply tap on it and reset the IP address to a new network. Lastly. Refresh all the settings and then reboot your device. Once your device restarts, check whether the issue gets removed or not.

Concluding Remarks:

In the above section, we have mentioned all the possible ways that you can try to overcome this situation. As this authentication error causes various issues with your Linksys router, it can be quite challenging for you to remove it. Hopefully, after applying the above procedures, you will be able to resolve this issue. But, in case you find any kind of difficulties while performing the above steps, then you can share your doubts in the comments section below. On the other hand, you can get in touch with the technical support team in order to get an accurate solution for this error.

11May/19

Belkin Router Port Forwarding: Effective Guidance At Your Fingertips

Most of the routers include a built-in firewall system that is designed to protect a network from any malicious attack. This feature is most suitable for businesses, since an unsecured network can lead to hackers accessing all of the confidential information. Therefore, firewalls block most inbound unsecured ports on a network. In case, there are computers in your office that connects to a wireless Internet via a Belkin router, then you can open ports on the Belkin router in order to make certain applications accessible. Thus, port forwarding the Belkin routers comes into play. However, if you are wondering how to perform the Belkin router port forwarding process, then this article is for you.

Hence, in this article, you will get the entire process of port forwarding the Belkin router at your office. Therefore, you can now get to the next section of the article below.

What is Port Forwarding on the router?

The Port forwarding on the router is a method of making a computer on your network accessible to other computers over the internet. It is commonly used for hosting game servers, peer to peer downloading, and voice over the IP type of applications. Moreover, there can be many more other reasons you may need to forward a port.

As you now know what is port forwarding, we will now proceed to the methods to port forward on your Belkin router.

How to Setup Port Forwarding on Belkin router?

Here in this section of the article, you will be to know the process of setting up the port forwarding feature on your Belkin router. The process is  divided into three parts for your convenience, then you can have a look at the section below:

Part 1: Connecting your Windows system to the Belkin router

In the first part, you have to connect the Belkin router to your system. The steps are as follows:

  • Open the Start menu and then open the Settings app. After that, you have to click on the Network & Internet option.
  • Next, you have to click on the View your network properties option. Now under the WiFi section, you have to navigate to the Default Gateway option.
  • Now, you have to find the router IP address. On finding it, you have to enter the same IP address in any web browser.
  • Once you have entered the Belkin router IP address in the address bar, you have to hit the Enter key.
  • In the next step, you have to enter the default username and password of the Belkin router home page.
  • As the Belkin router home page opens, you have to navigate to the Forward Port section.

After following the first part you can proceed to the next part below.

Part 2: Connecting your Mac to the Belkin router

If in case you want to port forward using a Mac system then, you can follow this section. Hence, the steps to perform as discussed as follows:

  • First of all, you have to open the Apple menu, and then you have to click on the System Preferences option.
  • After that, you have to click on the Network option and next, you have to click on the Advanced option.
  • In the next step, you have to click on the TCP/IP button. Now you have to see the number beside the Router heading. This number will be the IP address of the Belkin router.
  • Now, you have to return to the Home screen and then follow the same process of Belkin Router login on the web browser.
  • Here, you can follow the same process just as we have discussed for the Windows platform.
  • As you get to the Belkin router home page, you have to proceed to the Forward Port section.

Therefore, after getting the port forwarding page for both Windows and Mac, you can proceed to the next section of the article below.

Part 3: Forwarding a Port

Once you are inside the Port forward page of the Belkin router, you can now follow the steps that are given below:

  • First, you have to create a custom port forward entry. Here, you have to enter the name and type of the port forward connection.
  • In the Service Type section, you have to select the TCP or UDP option or both.
  • After doing that, you have to enter the Start Port number and then the End Port number.
  • In the next step, you have to enter the system’s private IP address in the Private IP field.
  • Now, you have to save all the settings by clicking on the Apply or the Save button. If prompted, you have to toggle on the switch beside the Port Forward.
  • After that, you have to restart the system and the Belkin router in order to apply all the changes.
  • Once the system and Belkin router reboots, check if you have successfully port forward the Belkin router.

So, this is how you can perform the Belkin router port forwarding feature on your own.

Rounding it Off!

To conclude, these are the three parts that will help you to perform the port forward feature of the Belkin router. This article of Belkin router port forwarding is the ultimate article that will fulfill all your port forwarding needs. Moreover, the steps in the process are simple and easy to follow. Hence, you will not face any difficulty in performing the steps. However, in case you want to get additional help, then reach us through the comments section below. Additionally, you can use the comments section for sharing your experience and feedback.

11May/19

Tenda Router Setup| QuickStep Guidelines For Installing This Routing Device

Many users are not aware of the correct steps yet, in order to carry out the Tenda router setup on their devices. This is one of the main reasons why most of them report about not getting proper WiFi signals on their PCs. However, there are some customers, who are unable to install this routing device due to lack of proper installation media as well.

So, it doesn’t matter whatever the reasons are, you need to have step-wise knowledge for setting up your Tenda router. In this article, you will get to learn the proper step by step guide for installing the router driver and access the setup wizard. It will also discuss the instructions to set up a Tenda wireless router without any installation CD/DVD.

Things You Need to Know While Doing the Tenda Router Setup on Your System

Tenda routers are manufactured for providing strong wireless connection along with good network coverage. But, in order to utilize most of its features, you need to know the Tenda router setup process.

So, if you are considering setting up this routing device within your home or office space, configuring it is very important. Hence, let’s take a look at the instructions to carry out the router set up in details.

Instructions for Doing DHCP Setup

To do this setup,  first, connect your Tenda router to the PC and follow proper steps for completing the installation. Then, connect your computer to a reliable Internet connection and use the router’s blue port to connect the modem.

  • After connecting your Tenda router to the computer with proper cables, check whether the system LED is blinking or not. You need to see if the lights corresponding to LAN and WLAN are either on or blinking consistently.
  • If you are using a Windows-based computer, go to ‘Settings’ and select the feature of ‘Network and Sharing Center’. Now, hit the tab for ‘Change adapter settings’ and locate the icon for ‘Local Area Connection’.
  • Next, you will have to select the option of ‘Properties’ by right-clicking on your LAN network. Then from the list of items, find the tab for ‘Internet Protocol Version 4’ and double-click on it.
  • After this, select the option of ‘Obtain DNS Server address automatically’ as well as ‘Obtain an IP address automatically’. So, ensure that you press the ‘OK’ button on both this page and the previous one.
  • Then exit the LAN Properties window and open a reliable web browser on your Windows-based PC. Next, go to the address box and enter ‘192.168.0.1’ and press the ‘Enter’ key.

Now, select the feature of DHCP and create a WiFi password by following security key instructions. Then hit the tab for ‘OK’ and select the ‘Advanced Settings’ button. You can now easily determine if the Tenda router setup is correctly done by seeing the status of the Internet. So, if it is displayed as “Connected’, it means you have applied the setup process perfectly. In case, the connection is not shown as active, try a different approach to complete the installation for the Tenda router.

Steps to Configure the Tenda Router:

First, examine the router that you don’t have any technical or physical defect and connect it to the power adapter. Then use the Ethernet cable obtained from ISP and connect it to the router’s WAN port.

Now, take another Ethernet cable with same technical specification and connect one end to the router’s LAN port. The other end of this cable has to be connected to the laptop or computer, where you want to set up the router.

In case, you want to perform the Tenda router setup for a wireless network, make sure the PC is also WiFi enabled. However, you need to make use of DHCP setup for configuring the settings for Tenda routers.

Instructions for Wireless Tenda Router Setup Without CD/DVD

You can make use of a wired connection while plugging in the Tenda router to your PC or laptop. So, first, locate the yellow ports on your router, which are marked between 1 to 4, on your router. Then, connect your computer to this port and launch a web browser by using a stable Internet connection. Next, apply the following steps in the proper sequence if you want to understand how to setup Tenda router.

Step 1

Now, you need to open the address box and write ‘http://192.168.0.1’ in it. If your system prompts you to enter the username and password, type ‘admin’ and ‘username’ in the place of login credentials.

Then, the Tenda setup page will display a welcome message along with the list of items on the left panel. So, click on the tab for ‘WLAN Settings’ and it will show a new ‘Basic Settings’ page on the right side.

Here, select the option of ‘Enable’ beside the section of Broadcast (SSID) and also type a name corresponding to the network name. If you don’t want to pick a new name, you can keep its default name ‘Tenda’ as well.

Step 2

After making these changes, hit the ‘Apply’ button at the bottom of the page. Then, go to the ‘Security Settings’ tab, where you can select the type of network security for your Tenda router.

Hence, click on ‘Security Mode’ and select ‘WPA Personal’ or any other option based on your security preferences. Also, remember to select ‘AES’ beside the section of ‘WPA Algorithms’.

Next, you have to modify the value for ‘Pass Phrase’ from ‘PlsChangeMe’ to something more convenient for Tenda. After typing the new pass phrase, don’t apply any further changes to the value for ‘Key Renewal Interval’.

Step 3

Finally, hit the ‘Apply’ tab and move to the section of ‘WPS Settings’ in the left panel.

So, make sure that you choose ‘Disable’ beside ‘WPS Settings’ option and click on the ‘Save’ button.

Go to the link for ‘System Tools’ and hit the tab for ‘Change password’. You can also modify the username and password for setting up the Tenda router if you want. Otherwise, keep the default username and password as ‘admin’ and log into your router configuration page.

If you experience any difficulty while following the instructions to perform the Tenda router setup, you can contact a professional. They can suggest advanced steps regarding how to setup Tenda router with detailed instructions. You can also consult them for troubleshooting technical issues, which you can face while setting up Tenda router.  

11May/19

Asus RT-N66N Setup: An All Inclusive Guide

The Asus RT-N66N setup process comprises of some steps which when strictly followed will result in a properly working router. However, any wrong steps might harm your router and you may face technical issues with it later. It might also happen that you fail to set up the router correctly and end up with your Asus device not working at all.

Hence, go through the article properly. This article is aimed at providing the exact step-by-step procedure to set up the Asus “Dark Knight” RT-N66N router with a static IP address. Therefore, follow this post and apply the steps accordingly to set up the router correctly.

How to Setup the Asus RT-N66N Router?

If you have just got hold of the Asus RT-N66N router, and are not aware of the setup procedure, then this article will help you to do so. But you need a clear picture in your mind on how to setup Asus RT-N66N router with ease. Before proceeding with the setup process, you need a high-speed internet connection on your device.

At first, unbox the router and remove all the parts from the box. After that, you need to connect all the required cables to the router and power it on. Connect the router to the power source and the computer. Then you will have to launch a preferred browser on your desktop or the laptop. Now, you will notice that a quick installation setup wizard page opens up.

Now, follow these simple steps to create a secure and personalized connection using the router. Please make sure that you have a stable internet connection to complete the setup process.

Step 1

At first, plug one end of the ethernet cable that is provided to you into the Internet Out Port on the modem and the other end into the port which is mainly blue in color on the back of the router. Next, you need to open the wireless settings. To do that, click on the WiFi icon which is located in the bottom right corner of the system screen.

Step 2

Now, you need to connect the router and then go to the router’s access page in the web browser. You need to enter the proper IP address in the address bar. Hit the Enter button to open the router home page. Then you should provide a username and password. After that, press the Next button to proceed further. This will adjust the settings option of the router. It is recommended that you provide a strong password.

Step 3

Now, you need to create a name for the network. The name which is known as SSID is used to identify the network. You can choose the same name for the 2.4 GHz and 5 GHz as well. The 5GHz network is comparatively faster than the 2.4 GHz network. You can choose this for streaming HD video content and gaming as well. But for web browsing, you can use the 2.4 GHz network.

Step 4

When you give a new name to the network, it will automatically disconnect from the network. Then you should reconnect to the internet. Enter the IP address again to go back to the router webpage. Log in with the username and password that you have set in the previous step. After that, go to the Administrator tab and then choose the Firmware upgrade tab. Check whether any latest firmware version is available or not.

Step 4

It will take a couple of minutes to connect to the websites and check for upgrade. A confirmation box will appear on the system screen. Click OK to confirm the action. It will automatically start downloading the latest firmware. Now install the latest version and restart the router and system as well.

Step 5

Thereafter, go to the router and press the power button of the router off an on. Congratulations! Now you have successfully set up the Asus RT-N66N router. Now, enjoy high-speed internet services through the router.

Final Recommendation

The above steps are sufficient to set up the Asus RT-N66N router. Follow the above guidelines carefully and apply them accordingly. It is recommended that, do not skip any step. It will damage your system and the router as well. If you face any problems during the setup process, do post them in the comment section below. The process of setting up Asus RT-N66N is a bit technical. Hence, you can connect with a reliable technician to do that job for you.

10May/19

Troubleshoot Can’t Login To Netgear Router Error With Easy Hacks

Imagine a situation where you have some urgent task and suddenly you check that you are unable to login to your Netgear Router. Doesn’t it become quite frustrating? Yes, this is one of the most common issues encountered by the Netgear router user. However, this problem arises for a number of reasons such as forgetting the login username and password. Sometimes, the problem may also occur due to some misconfiguration with your router.

Therefore, If you are encountering can’t login to Netgear router error, then this article is for you. Through this guide, we have tried to present all the possible solution that can help you to get rid off the issue. So, let’s start to read the upcoming part of the article to know the details on it.

Effective Solutions on Can’t Access Netgear Router:

Now, if you are unaware of how to resolve this error on your own, then the following steps will definitely guide you in the best way possible. Go through the steps that are written in the following part of the article, to know the details on it.

Solution 1: Reset the Netgear Router

Resetting the Netgear router might help you to resolve the error effectively. Now, to do so, follow these steps.

  1. At first, you will need to detach the Netgear router from its modem.
  2. Then, press and hold the Reset button of your router for a few minutes. Keep holding the button until the LED light flashes.
  3. Once the LED light is turned on, now release the button. Then, wait for a few minutes to Restart the system properly.
  4. After that, connect a computer with your Netgear router. And open your preferred browser and visit the official website of the browser.
  5. Now, a pop up will appear on your screen while confirming your task. Click on the Yes button to continue with it.
  6. Thereafter, you will need to choose the router mode from the next page.
  7. Then, click on the Yes button to turn off the Wi-Fi modem router.
  8. Furthermore, you will need to proceed with the next step by following the onscreen instructions. Then, check if the problem is resolved or not.

Solution 2: Change the Admin Password of the Netgear Router

You can also get rid of the problem by changing the password of the Netgear router. If the procedure to change the password of Netgear is unknown to you, then you should follow the steps that are written below.

  1. At first, open your preferred browser and visit the official website of the manufacturer.
  2. After, opening the website the login Window will appear on your screen.
  3. Now, login with the Administrative username and password.
  4. Then, click on the Advanced option, and then select the Administrative tab. Thereafter, click on the Set Password option.
  5. After that, write down your existing password.
  6. Then, enter your new password and again re-enter the new password.
  7. Now, click on the Enable Password Recovery option. This will help you to recover your password in the future.
  8. Click on the Apply button to save all the changes that you have made.

Solution 3: Log in with the Router and Derive the Settings

If you can’t log in to Netgear genie, then you should try to change the router settings. The following steps will help you to change the settings of your router.

  1. At first, your preferred web browser. Then, visit the official website of the browser and write down the default IP address.
  2. Thereafter, press the Enter button or click on the Search bar.
  3. Then, enter your name and password in the login Window.
  4. After that, click on the OK or Log in button and follow the onscreen prompts. And if you find any misconfiguration in the settings option, then you should change the settings of the router as per requirement.

Solution 4: Configure the Router for Cable Internet Connection with Smart Wizard

If all the methods have failed to resolve the error can’t login to netgear genie then, you should try to configure the router for cable internet connection with a Smart Wizard. The steps which are next to you will help you to do so, go through it.

  1. Connect your Netgear router with the modem through an internet cable. Also, you need to connect your computer with a LAN port.
  2. Turn off and turn on all the devices such as computer, router, and broadband or cable modem. And let’s boot up the devices.
  3. After that, open your preferred browser and write down the IP address in the Search bar. And hit the Enter button.
  4. Then, log in to the router with the admin username and password. If you have forgotten your admin password, then you should try to perform a factory reset in your system.
  5. Thereafter, click on the Setup Wizard option, now the Setup Wizard screen will appear on your screen. Then, click on the Yes button and select the Next option.
  6. Furthermore, you will need to proceed with the next step by clicking on the Next button from the Dynamic IP section.
  7. Then, click on the Router Status option that you can find under the Maintenance section. Now, check if the problem is resolved or not.  

Wrapping it up

Through this article, we have tried to present all the possible solutions that can help you to fix your problem with can’t login to Netgear router. Try the steps that we have mentioned in the entire part of the article, to get rid of the issue without further hassle. If you have any more queries regarding this topic, then you can comment us down to the comment section.

09May/19

A Comprehensive Guideline On “How To Setup Linksys Router Without CD?”

Trying to set up the Linksys router and wondering “how to setup Linksys router without CD?” Then, don’t panic. Pat your back as you have dropped on the right page. Moreover, the Linksys router setup process is very simple and of course, you can do it manually by some easy steps. Furthermore, you won’t even be needing to run any installation CD or any kind of other software to set up the Linksys router.

Here, in this informative post, we have described the most effective solution for you to ease your pain up. All you just require to do is to follow through the setup steps and we are sure that you will be satiated with your search coming to an end. Thus, without delaying too much, let’s get into the steps directly to set up the Linksys router.  

Linksys Router Setup without CD: Easy Steps

In case your system has a corrupt CD drive or you have just lost the setup CD to install your Linksys router. Then, also you can still set up the Linksys wireless router without the installation CD. You just need to download the Linksys Connect Setup Software from the Linksys official support website. To setup Linksys wireless router without CD, you just need to make sure that the system is connected with a strong and active internet connection.

Step 1

At first, you need to go to the web browser of the system. After that, open the Linksys official support website.

Note: You can use any web browser to open the Linksys official support website. (Mozilla Firefox, Google Chrome)

Now, you need to go to the search field on the Linksys official support website. Next, enter the model number of your Linksys router. Then, tap on the Ok button to proceed further. Alternatively, press down the enter key on your keyboard.

In case you don’t know the model number of the Linksys router. Then, you need to flip the node over. Find the model number and serial number below the Linksys logo.

Step 2

After completing the above method, tap on the Download Firmware button to proceed further.  

Step 3

In this step, you need to choose the Hardware version of the Linksys router model.   

Note: You may get the version of the hardware below or beside of the model number of the router. Moreover, the hardware version of the Linksys router model is labeled as ver. or V. However, in case you are getting no version number beside the model number of the Linksys router. Then, the Linksys router model is version 1.       

Step 4

Whenever you locate the setup application for the system. Then, you need to tap on the Download button. Be patient and wait for a few minutes to get the license agreements.

Step 5

Now, you need to follow the on-screen prompts of the license agreements. Tap on the Agree button whenever the license agreements window appears.

Step 6

In this step, you need to save the setup software and choose a location on the system. Moreover, it is always advisable to save the setup application on the system’s desktop. This process may take some time to complete. Therefore, you need to wait for a minute while until the entire process completes.  

Step 7

Now, tap on the license terms links to understand the license terms and conditions. Mark the checkboxes of the license terms and conditions. After completing all the ticks, tap on the Next button to proceed further.

Step 8

In case your Internet connection of the system is through satellite, Fiber optic, T1 which doesn’t have a modem to access the internet. Then, you need to connect the existing Ethernet cable to the Internet port of the Linksys router model. To do so, find the yellow internet port on the Linksys router to connect the Ethernet cable. Once down, tap on the Next button.

Note: Here you will find that the Linksys Connect will begin the process of configuring the network for your Linksys router. While the configuration process is running, do not close the screen. This configuring process of the network may take some time to complete. Therefore, you need to wait for a minute while until the entire process completes.  

Step 9

Now, the setup process will automatically generate a unique router password and a unique name (SSID) (Service Set Identifier) of the router for the network. Additionally, you can also modify this data by editing the automatically generated password and Service Set Identifier (SSID) for the wireless network of your Linksys router. After completing all the above-mentioned steps, tap on the Next button.   

Step 10

This installation process will automatically identify the type of internet connection. Now, a particular window will show up, if the application recognizes that you are utilizing a DSL connection on the Linksys router. In the window, you need to enter the complete details of the user account along with the password. After completing all the above-mentioned steps, tap on the Next button.   

Note: Your Internet Service Provider (ISP) administers both the password and name of the account. In case you do not have these, then you need to contact your ISP (Internet Service Provider).

Step 11

In this step, you will get a confirmation screen symbolizing that now you are connected to the wireless network to access the internet. Choose the Ok button to proceed further.  

After that, you will be redirected to the main Linksys Connect screen. Moreover, this window includes several options which grant you to control and personalize the settings of the network.

Now, you will be done with the Linksys router setup process. Additionally, the wireless security settings of the router are configured by automatically along with the setup process of the Linksys router. Therefore, now, you are ready to connect the systems and wireless devices to the network without any hassle.   

Wrapping Up

Now, with this informative post, the setup process of the Linksys router will be completed. Hopefully, with the help of this process, you will be able to set up your Linksys router within a flicker of time without any hassle. This article will assist you if are not that much into technical things, to execute the above-stated easy 11 steps. Thus, you do not require any extra technical knowledge or ideas to perform the Linksys router setup process. Thus, if you encounter any issues in any of the above-mentioned steps, then you can post your queries in the comment section below. Alternatively, you can follow the user manual guide book of the Linksys router for more references on “how to setup Linksys router without CD?”  

09May/19

Useful Hacks To Resolve Common Linksys Routers Problems

Linksys is one of the common brands of routers available at your nearest stores. However, many of the users are worried about the common Linksys routers problems. If you are facing any problem with your Linksys router, then you can study this article further. This article covers all the methods with the application of which many of the routers problems can be resolved. So, try them one by one, after knowing the steps for the methods, which you can learn from this article.

Common Linksys Routers Problems

Below is the list of common Linksys router problems. If you are stuck with any of them, then worry not and try the methods explained further:

  • Slow internet connection
  • Linksys router is not detected by the system
  • Internet connection disconnected frequently
  • Forgot Linksys router password

General Solutions on the Linksys Routers Problems

According to the factors causing the Linksys routers problems, these below are the selected solutions you can try to fix the matter. So, check them all till the end to learn the methods efficiently.

Solution 1: Restart your Linksys Router as well as the PC

Sometimes, the network issue arises due to the loose wire connections. If this is the case, then you can resolve it very easily by following the steps as stated below:

  1. At first, close all the open windows on the screen.
  2. After that, tap the Windows buttons.
  3. Next, click on the “Shut down” button, if you are a user of the previous version of Windows. However, if you are the Windows 10 user, then you need to click on the Power icon at first, which is at the left-hand side of the window, which gets open after tapping down the Windows button. And then, select the “Shut down” button from the menu list.
  4. Once the PC turns off, switch off the power supply for both the computer as well as the router.
  5. Next, take out the cables from the modem, remembering their exact locations. Also, detach the other end of the cable from the PC which connects Linksys router with the computer.
  6. Now, wait for a while and reconnect the cables to the exact locations of the modem, where they are attached before.
  7. After that, Switch on the power supply.
  8. Next, tap down the Power button, as you always do to turn on your PC.
  9. Further, as you see that the lights on the router get stable, connect the computer with the internet.
  10. Then, by using a browser try to connect with an online video to check if the Linksys router works normally or not.

Solution 2: Reset Linksys Router

If you have forgotten the Linksys router password, then this problem can be solved easily by the Hard Reset process of the Linksys router. The Hard reset of the Linksys router will revert the made changes to default. And the steps you need to follow to reset the Linksys router are as follows:

  1. At first, you need to turn off both the router and the PC. Follow step 1 to 4 of “Solution 1” for that.
  2. Next, wait for a minute and then takes out all the cables from the router’s back except the power cable.
  3. Then, switch on the power supply for the Linksys router.
  4. After that, locate the reset button of the router. A tiny hole with the Reset note below is the reset button of the router. It is generally located at the rare portion of the router.
  5. Next, take a pin (paper clip) which can be fitted to go inside the reset button hole. And by using the pin, press and hold the reset button until the power indicator becomes solid red.
  6. And then, you will see that all the lights on the router start blinking. Wait until the light stops blinking, this indicates that the reset process is done successfully.
  7. Next, switch off the power supply for the router.
  8. Further, connect the Linksys router with the PC via the ethernet cable.
  9. Now, turn on the power for both the router and the PC.
  10. Next, set up the router and check if the issue gets resolved.

With the help of these steps above, you will also be able to solve the Linksys router is not detected by the system problem. In general, this problem arises if you intentionally or unintentionally disabled the network for other devices.

Solution 3: Update the Network Drivers

If you are using an older version of the network driver, then this can lead to many of the common Linksys routers problems. So, updating the Linksys router driver is one of the common ways to solve many of the problems which arises while connecting to the internet. The steps to follow to update the network driver is very easy and are as explained below. So, learn the steps at first before you begin with the process.

Open Device Manager

At first, you need to open the Device Manager window. Choose any of these two processes for that.

Process 1: Press Windows and the letter R key at a time, at first, to open the Run bar window. Then, make sure that there is no command is present on the Run bar and if then delete that with the help of the Backspace key. Next, on the Run bar type “devmgmt.msc” without the quotations. And lastly, press down the Enter button or click on “OK” to open the Device Manager window.

Process 2: Open the search bar by tapping down the Windows button. Then on the search bar type “device manager” correctly. Next, from the search results, click on the Device Manager option to get the window open on the screen.

Navigate to Network Adapters> Update Driver Software

After following any of the above processes, from the Device Manager window navigate to the “Network adapters” option, and double-click on it to expand. Next, from the available options under the Network adapters, right-click on the Linksys driver. And then from the menu window select the “Update Driver Software…” option. This will open the “How do you want to search for drivers?” window, with the options are as below:

  • Search automatically for updated driver software
  • Browse my computer for driver software

Click on “Search automatically for updated driver software”. Then, you will see that the searching process gets in progress by opening up the default browser window. Once the searching process is completed, you will get up a result window open. Now, follow the on-screen instructions to download and install the update of the network adapter. Once the update gets installed, restart your PC and then check, if still, the Linksys routers problems exist or not.

Solution 4: Check the Hardware Parts of the Linksys Router

Any defects of the Linksys router components can also responsible for the Linksys routers problems. So, check all these below-mentioned components of the router:

  • Router adapter
  • Ethernet cable
  • Power outlet, where the router is plugged in

All these are the effective methods with the application of which many of the users were able to solve the Linksys routers problems efficiently. It is advised to verify the above methods at first before you try them according to the problem you are facing.

08May/19

Can’t Connect To Dlink Router: A Complete Guide To Gain Back The Internet Connection

Dlink routers are popular in delivering its users fast internet speeds and also an extended range of coverage. But despite being an outstanding router, it can show some issues while you use it. Sometimes, you may get to face certain issues that can make you search for solutions here and there. If you can’t connect to Dlink router, then you can get all the solutions here. This Dlink router connection issue is one of the most common issues that many Dlink router users face.

Therefore, here in this article, you will get to learn some of the methods that will help you resolve the Dlink router connection issue. Also, in this article, you will not only get the solutions but also the causes of this Dlink router connection problem. Hence, you can now relax and follow the article to the end.

Causes for “Can’t Connect to Dlink Router” Issue

Here in this section of the article, you will get to know some of the causes of this Dlink router connection issue. Tave a look at the causes given below:

  1. Having an improper configuration of the Dlink router settings can lead to the issue.
  2. If in case the Internet Protocol address and port are incorrect then you can get to face this Dlink connection issue.
  3. If you have disabled the admin interface then also you can encounter the issue.
  4. If the internet connection service is slow, then also you can get the Dlink issue.
  5. Having a low ping of the wireless network is also another reason for the Dlink router issue to occur.

Therefore, these were some of the causes that can lead to the “can’t connect to Dlink router” issue to occur. However, there can be more such causes of this Dlink router issue. So whatever your case may be, you can get the solutions here. Hence, you can now move forward to the next section of the article below.

Can’t Connect to Dlink Router: Effective Fixes

Therefore, follow this section of the article, as we will be going to discuss some methods to fix this Dlink router issue. Hence, in order to get through the Dlink router connection issue, you can have a look at the methods below:

Method 1: Disable the Bridge Connection of Your Local Area Network Connection

The bridge connection of the LAN is a feature that connects two or more network in order to provide better internet connectivity. If in case this Bridge connection is causing some issues with the Dlink router, then disable it without giving any second thought. Now, if you want to learn the steps of the process, then we will teach you. Hence, you can now perform the steps that we have discussed below:

  • In the first step, open the Start menu and then open the Control Panel from there.
  • Once the Control Panel window opens, open the Network and Internet option from the list of options.
  • In the next step, click on the Network and Sharing Center option from the list.
  • Once you are inside the new window, click on the Change adapter settings option form the left pane.
  • Now a list of all network connections will popup up on your system’s screen. From the list. Find the Bridge connection and then right-click on it.
  • Now, click on the Disable option form the popup list of options.
  • After doing this, restart your system. As the system reboots, check if you can connect to the Dlink router.

This is how you can disable the bridge connection in order to fix the Dlink router connection issue. However, if in case you still can’t connect to Dlink router, then don’t panic. You can take a look at the next troubleshooting methods below.

Method 2: Check if the Internet Protocol (IP) Address is Correct or Not

Your system must have an IP address in the same range of the device that you want to configure. If there is any mismatch in the IP address, then you can get some difficulty in the Dlink router connection. Therefore, check if the IP address is correct or not. However, if you are not able to perform the steps then we will help you. Hence, perform the steps that we have provided below:

  • First of all, open the Control Panel from the Start menu.
  • When the Control Panel window opens, choose the Network Connections option. After that, click on the Local Area Connection option.
  • Now, right-click on the Internet Protocol TCP/IP and then choose the Properties option from the popup list of options.
  • After that, check the Use the following IP address option box.
  • In the next section, specify the TCP/IP settings that you want to use:
    • IP address: 192.168.0.5
    • Subnet mask: 255.255.255.0.
    • Default Gateway: 192.168.0.1.
    • Preferred/Alternate DNS: 202.129.64.198 / 4.2.2.3.
  • After changing all the options, click on the OK button.
  • Finally, again click on the OK button in order to save all the changes.
  • After that, check if you can connect to the Dlink router or not.

Therefore after making the changes in the IP address, hopefully, you’ll be able to resolve the can’t connect to Dlink router issue easily. However, if you want to more such methods then you can move to the next fixes.

Method 3: Check if the Internet Settings are Correct

If there are incorrect changes in the internet settings then you are bound to face issues with the Dlink routers. Hence, check if all the internet settings are correct or not. You can follow the steps below that will help you to check the internet settings:

  • Again, open the Control Panel from the Start menu.
  • As the Control Panel window opens, find the Internet Options link from the list. On finding it, click on it.
  • After that, navigate to the Security tab in the Internet Options window. Now, click on the Default level button.
  • In the next step, click on the Connections tab of the window.
  • There, set the dial-up option to the Never dial a connection option.
  • After that, choose the LAN Settings option. Now, uncheck all the options available there.
  • In the next step, click on the OK button. Now, close all the active windows.
  • After that, restart the system in order to check if you can connect to the Dlink router or not.

So, this is how you can resolve the can’t connect to Dlink router issue by checking the internet settings. However, if even after following the steps above, you still get to face the Dlink router connection issue, then don’t worry. Hence, you can have a look at the other methods in the following part of the article.

Method 4: Check the Internet Protocol (IP) Settings and Reset the Dlink Router

If you cannot access the configuration page of the Dlink router, then you need to check the IP settings of the router. If you want to know the steps of the process, you can have a look at the section below:

  • In the first step, open the Run dialog box using the combination of the Windows logo and the R key.
  • Now as the run dialog box opens, type cmd and then hit the Enter key.
  • A black Command Prompt window will open up on your system’s screen.
  • In the next step, type ipconfig in the command line. After that, hit the Enter key from the system’s keyboard.
  • Now, put the IP address on the network adapter in the 192.168.0 range. After that, type “arp -d” and again hit the Enter key.
  • Now if you get a message reading “The specified entry was not found”, then reset the Dlink router.
  • In order to do this, disconnect all the Ethernet cables and then press and hold the Reset button.
  • Once the Dlink router resets, set up the Dlink router.
  • After that, check if you can connect to the Dlink router to the system or not.

Hopefully, now you are able to resolve the can’t connect to Dlink router issue on your own. Moreover, if in case you still encounter the Dlink router connection issue then we have more fixing methods in store for you. Hence, you can have a look at the next part of the article below.

Method 5: Change the Wireless Channel of the Dlink Router

Changing the wireless channel of the Dlink router has helped many users to fix this Dlink connection issue. Therefore, you can also give it a try. You can have a look at the steps below.

  • First of all, open any web browser on your system. Once you are inside the web browser,  enter http://192.168.0.1 into the address bar.
  • Now hit the Enter key from the system’s keyboard and then log in to your Dlink router home page.
  • After that, click on the Settings option on the Dlink router home page. Next, click on the Wireless option from the list of options.
  • In the next step, click on the Advanced Settings option. Now, click on the Wi-Fi Channel box.
  • After that, select your desired channel and then click on the Save option.
  • Finally, check if you can connect to the Dlink router or not.

So, these are steps that you can follow in order to change the wireless channel. Thus, this will help you to resolve the can’t connect to Dlink router issue in an instant. We hope that now you are able to resolve the Dlink router connection issue on your own.

End Notes

At the end of this article, we want to conclude that you will be able to resolve the can’t connect to Dlink router issue with the methods above. Moreover, these methods above are best in class in resolving any Dlink router issue. Also, if in case you want to know more about such fixes, then you can write to us. You can take the help of the comments section below this article.

08May/19

A Complete Guide On How To Reset Asus Router

Asus is one of the leading brands in the electronic gadget market. Asus is popular all over the world due to their cheap yet durable products. In the past, we have provided various guides for Asus devices. Yet today we have come with another guide for Asus device which is how to reset Asus router. So if you have an Asus router in your home and looking for a genuine guide to reset it then please go through the rest of the article.

Why Do People Need to Reset the Asus Router?

A user needs to reset his Asus Router for various reasons. Some of them are:

  • If you buy a second-hand router from another user, then it is possible that the previous owner forgets to clear the settings. So performing a factory reset will clear all the changes made by the previous owner.
  • If you are getting gateway timeout error while entering the website, then also you need to fix the problem by rebooting the router.
  • When your router server crashes due to too much load or if suddenly you stop getting internet connection from your router, at that time, rebooting the router will be the first choice for you.
  • Resetting the router is the best way to solve minor errors such as error 55, 62, A2 and many more. In 80% of error codes solution guide, you will get a reset router option as an effective solution.
  • Sometimes, when you buy a new computer or update your device operating system, your router can stop working with the current device because of some configuration conflict. At that time too, we need to reboot the router to factory mode in order to set the configuration from scratch.

Methods to Reset Asus Router

No matter which model of the Asus router you are using there are basically two methods available to reset it. First one is using the Reset switch build in the router and the other one is using the admin control panel. We have provided a guide for both of them in this article. In addition, we have also provided a method to reset your password. So you can also go through it if you want to.

But keep in mind that once you reset the router the following settings will be changed:

  • Asus Router username and password.
  • Wi-Fi username and password.
  • ISP ip addresses and DNS.
  • Any firewall settings you have made.
  • Any port forwards you have set up.
  • Generally, any configuration or settings changes that you have made to your router.

If you don’t want to change one of the above-mentioned settings then please avoid resetting your password and contact the manufacturer for an alternative method to get your desired result.

Method #1: Reset Router With Button

If you want to factory reset Asus router, then the easiest and quickest method will be to use the Reset Button. To apply this method, at first, turn on the Asus Router and then look for a button or a hole which is labeled as Reset from the back of the router. Now use a paper clip or pin to put it in the hole and then hold it down for 10 to 15 seconds. Once a certain amount of time passes, release the button. Now, your router will automatically start the reset process. Simply wait till the reset process completes and once it’s ready, check if all the router LEDs are blinking in green or white color. If you see a red blinking in the indicator, then you need to redo the process again or try a different method.

Method #2: Hard Reset

If you are not able to reset your Asus router with the above method, then you can try to force reset your router to get the same result. If you don’t know how to force/hard reset your router, follow the steps below:

  • At first, turn on the Asus router and once it turns on press and holds the Reset button for 30 seconds.
  • Then, while holding the router reset button, unplug the power cable of the Asus router. After unplugging the power cable hold the reset button for another 30 seconds and then release it. Some Asus router device comes with a battery. If your router also has a battery then remove it after unplugging the power cable.
  • After a few minutes attach the battery back to its place and once again hold the Power button. Next, while still holding the router reset button down, connect the power cable of the router to the socket and hold the button for another 30 seconds.

After going through all the above steps your Asus router will be reset and ready for use.

Method #3: Reset Asus Router From Admin Control Panel

Using the admin control panel is also a safe and guaranteed way to reset a router. If you have a computer in your home then this one will be the best option for you. So follow the steps below:

  • At first, turn on your computer and then launch any web browser from it such as Firefox or Chrome.
  • Once the web browser opens, type 192.168.1.1 in the address bar, and then press Enter.
  • When you hit the Enter button, you will be redirected to the router login page. Now, enter the administrator username and password in the proper field. If you don’t have the administrative username and password then you can use the default username and password (look behind the router model or manual to get the default password). After providing all the required information press Ok.
  • Once you enter the router setting page go to the Advanced Settings menu on the left side of the page and then click on Administration.
  • Next, from the top of the page, click on the Restore/Save/Upload Setting tab and after that select the Restore button.
  • In the end, a confirmation window will appear. Simply click on the Ok button to confirm your action and start the reset process.

Method #4: Reset Router Password

If your main motive is to reset the password of your router then it is pointless to reset your whole router setting just to achieve it. There is a method available which allow you to change the password without having to reset Asus router. So follow the below steps carefully:

  • Once again enter the router login page in the same way as above and after you land to the setting page, click on the Wireless option present in the left-hand sidebar.
  • When the Wireless setting window appears, click on the General tab present in the top of the screen.
  • Now from the General tab, set the channel bandwidth to 2.4GHZ and provide an SSID (WiFi name).
  • Then, open the drop-down list of Control Channel and then select either 1, 6, or 11 from it.
  • Next, set the Authentication Method to WPA2-Personal (This option will provide you with the best security protection) and set WPA Encryption to AES.
  • Finally, set a WPA Pre-Shared Key for your router. This will be your network password, so try to set a strong password with 8-15 characters in length that contain no personal information.
  • After providing the WPA Pre-Shared Key, click on the apply button to save the changes.

Wrapping Up

Hope this article will be able to solve your query related to how to reset Asus router. We have tried our best to make this article as simple as possible to make it acceptable for all the users. But if you fail to reset your router with the above methods, then without a second thought, go to the service center to diagnosis the router accurately. Also, you can contact an expert for better guidance.