Monthly Archives: June 2018

29Jun/18
Router Error

How To Fix Wi-Fi Network Disappears Entirely Issue?

The issue may be due to problems in the router reset section. So, to avoid issues further, we recommend users to fix Wi-Fi network disappears entirely issue in few easy steps. Let us see what solutions we have for users to help them out to overcome the problem.

Steps to fix Wi-Fi network disappears entirely issue are

Fix Wi-Fi Network Disappears Entirely Issue

Step 1: Check if there is any router reset issue or not?

Check if users see any unprotected network problem which appears with a name after the brand of router? That may be your router. Users need to plug into their router with the help of an Ethernet cable, and work with our expert guideline to set up a wireless router and configure properly again.

Step 2: Check whether you need to fix any issue with the network?

To fix Wi-Fi network disappears entirely issue, if users do not see any such network, just plug the laptop into the router via an Ethernet. Secondly have a check whether you have an Ethernet connection. Now, work with our guidelines to search for your router’s IP address as well as a login information.

I hope all the above e steps will help fix your problem in an easy ways. But still if any issue is there then, connect us at below mentioned details.

Connect with our technicians anytime and get the most effective solution at your desk!

Router-Customer-Support-Number

We are a group of expert team available at Dial 18003358177 Router support number 24/7 hours to future effective solutions at your desk. Technicians are backed by exceptionally qualified and skilled knowledge about every minute to minute issue that arise within the router or with their Wi-Fi. So, place calls at our end and get solutions at your desk.

28Jun/18
Router Error

How To Resolve Linksys Router Error Code 2112?

Users will get this issue when there is a technical fault in Linksys cloud access mode and as a result it will result in instant modifications within the configuration section. Also, users will find out that this is not compatible with the device. To Resolve Linksys router error code 2112, users should follow a factory reset mode as well as reboot process of the device. Let us move ahead and see what the steps are to help you proceed easily.

Steps to resolve Linksys Router Error 2112 are

Resolve Linksys Router Error Code 2112

Step 1: Reboot mode
  • To resolve Linksys router error 2112, users should launch a web browser and enter a correct router’s IP address which is “192.168.1.1”. Also, one can type “myrouter.local” in the Address bar and hit on “Enter’ button now.
  • Move to the navigation pane and access the “Router Settings”. Now, click “Troubleshooting” icon and choose “Diagnostics” tab
  • Tap on “Reboot link”.
  • Users will now navigate to the “Important pop-up” box and click “Yes” icon.
  • Go to the “Router Reboot pop-up” section and tap on “Ok’ button.
Step 2: Reset to its factory default settings
  • As per as Linksys router support service expert team, launch a web browser and enter the router’s IP address as “192.168.1.1”. Alternatively, users should type “myrouter.local” icon in the Address bar. Press the “Enter” icon.
  • Go to the navigation pane and navigate to your ‘Router Settings”. Click “Troubleshooting’ icon and tap on the “Diagnostics tab. Reset the link thereafter
  • Navigate to “Important pop-up” box and tap “Yes” icon
  • Now, on the Router Reset pop-up box, tap “Ok” icon and close the browser.
  • Once done with the reset mode, users have to reconfigure it by using the Linksys cloud account.

For more such issues, connect with our team and get world-class solutions at your desk!

Router-Customer-Support-Number

We are a group of expert professionals who are available at Dial 18003358177 Linksys router support number 24/7 hours to deliver customers future effective solutions at their desk. Technicians are exceptionally qualified and have thorough knowledge about every issue which arise within the router. Feel free to approach us anytime and get world-class solutions at your desk.

28Jun/18
Router Error

How To Fix Netgear Router WPS Process Is In Progress Error Message?

The error will happen when users are attempting to save or apply some changes to their wireless settings. Fix Netgear router WPS process is in progress error message by applying our expert guidelines. Let us see what solutions we have for you to help overcome the problem in appropriate manner.

Steps to fix Netgear router WPS process is in progress error message are

Fix Netgear Router WPS Process Is In Progress Error Message

Step 1: The first step is to have a check whether there is any failure with the error message of WPS process which is in progress. Checking this will help users fix Netgear router WPS process is in progress error message easily.

Step 2: Secondly, one should try to solve the pop-message after users have disabled their WPS feature with the help of WPS wizard.

Step 3: As per as Netgear router support service technicians, check that the WPS LED will blink even after users have clicked on “Apply button” in the Wireless setting

Step 4: Press and hold the “WPS button” on the Netgear router for at-least about 30 seconds. As an alternative solution, users should check whether the WPS LED is in steady mode or not. The next step is to tap on “Apply” button which is found right under the “Wireless Settings”.

So, we have explained steps above to help users resolve the above error code. Still if the issue persists to happen then, approach our professional guidelines now.

Connect with our technical experts to fix more such queries with expert guidelines!

Router-Customer-Support-Number

We are a team of expert technicians available at Dial 18003358177 Netgear router support number 24/7 hours to apply a perfect blend of solutions as and when in need. Technicians study every issue from the core to know the exact cause of every problem. So, give us a call and get prompt solutions at your desk.

28Jun/18
Router Error

How To Fix Router Crashing Issue On Frequent Basis?

The problem may be due to there is reset technical fault in your router device. Before you get issue in future, we recommend you to fix router crashing issue on frequent basis with our expert guidelines. Below are steps we have explained users to help them resolve the problem in an easy way. Let us move forward now.

Steps to fix router crashing issue on frequent basis are

Fix Router Crashing Issue On Frequent Basis

Step 1: Try to resolve the reset problem first
  • To fix router crashing issue on frequent basis, the first thing is to reset the device and set it up from its scratch.
  • Now, in most of the routers, users will come across a “Reset” button which they have to hold down with a paperclip.
  • Do it at-least for 30 seconds and the router will set in its default mode from factory settings. Now, work with our guideline to easily set up a wireless router and get everything properly configured.
Step 2: Check whether the router is dying its connectivity power or not?
  • As per as router support service technical team, if users have set up the router from scratch do not help out then, quite possible that it is in its dying state. It will happen no doubt. So, to avoid it, we recommend users to consider buying a new one. But choose the best routers.

I hope the entire above step will help users resolve the issue in an easy manner. Still if it happens to exists then, we are right there at your end and remove this technical fault from the core.

Dial us at our below mentioned details and get a perfect blend of solution at your desk!

Router-Customer-Support-Number

We are a group of expert technicians available at Dial 18003358177 Router support number 24/7 hours to bring future effective solutions at your desk. Technicians at our end study every issue from the core and this proves to be an effective in terms of solutions. However we do explain users about every cause of the problem to have a better overview of the issue. So call us anytime and get prompt solutions at your desk.

28Jun/18
Router Error

How To Fix Linksys Router Forgot Smart Wi-Fi Router Password Issue?

It is one of the most common issues that arise in your Linksys Smart Wi-Fi Router. So, here we will discuss steps to fix Linksys router forgot smart Wi-Fi router password issue in easy ways. To know more, the router provides secure access to user’s house network from the browser. Here, one needs to perform a check on the text status that provide users a guest access to their network. This is quite easy to and to do this just tap on network icon of the smart Wi-Fi from user’s own mobile browser. Now, let us see what are the steps that are shown below to deal with this matter.

Steps to fix Linksys router forgot smart Wi-Fi router password issue are

Fix Linksys Router Forgot Smart Wi-Fi Router Password Issue

  • Check for a proper Linksys cloud connection

If users are working with Linksys Smart Wifi Router, then they should establish a proper connection and have a check on their password. Now, go to router settings and click on “advanced settings” icon. This will make a connection to 1 your device. This will help users retrieve a password easily.

  • Check for any available Linksys notepad file

To fix Linksys router forgot smart Wi-Fi router password issue, perform a check on the desktop for a notepad file. This will be the one which was users have created by connecting 1.4. This may also come up with Wi-Fi and router’s password.

  • Reset your Linksys Smart Wi-Fi Router

As per as Linksys router support service team, users can also try to reset the Linksys Smart Wi-Fi Router to its factory data settings and delete all the default customized settings that are there. Reset it according to the instructions that are shown in the instruction manual. As an alternate, users can also reset the default settings via a Linksys cloud account.

For more queries, Dial us and fix related issues that arise in your Linksys router!

Router-Customer-Support-Number

We are a group of expert team available at Dial 1-800-335-8177 Linksys router support number 24/7 hours to bring future effective remedies at your desk. Technicians study every issue from the core which helps them resolve minute to minute problem from the core. So, place a call at us and get prompt solutions at your desk .

27Jun/18
Router Error

How To Fix Wi-Fi Does Not Reach At Certain Room Error?

The error may arise when the router device is placed at far places and do not have enough to catch signals. Fix Wi-Fi does not reach at certain room error with our expert guidelines available at our end. Below we have steps to help you out deal with the issue in easy ways.

Steps to fix Wi-Fi does not reach at certain rooms error are

Fix Wi-Fi Does Not Reach At Certain Room Error

Step 1: Move your router

The closer, users are placing their router to the center of their coverage area, the better reception they will experience throughout the house.

Step 2: Adjust your antennas

As per as Router support service technical team, users need to adjust their antennas. If the house is big enough then, alternating between fully vertical and fully horizontal positions will help reach the device in multiple directions. Check this tip for the solution to improve.

Step 3: Check if any interference is there

If users are living in an apartment building with a huge crowd then, they need to change the router’s channel. Check if it overlaps with nearby networks or not? If so then, resolve to fix Wi-Fi does not reach at certain rooms error.

Step 4: Consider purchasing a powerful router

This is an essential step because with whatever routers users are working isn’t that powerful enough for their home. As an alternate option, consider to purchase a wireless repeater, or just set up an old router to use it as a repeater. Also, users can consider it as a second access point, to extend their network a bit more.

For more error messages in routers, we bring our users un-matched remedies at desk!

Router-Customer-Support-Number

We are a group of expert team available at Dial 18003358177 Router support number 24/7 hours to deliver customers future effective remedies at their desk. Technicians study every issue from the core which always assists customers convey the exact solution for every cause. Fix more such technical glitches with our expert team within instant request.

26Jun/18
Router Error

How To Fix Netgear Router Flashing DSL LED Issue?

The blog will take you through details of how to fix Netgear router flashing DSL LED issue in few simple steps. This error will usually arise when there is a wiring problem while users are trying to view the lights on their DSL modem. At this point of time, there will no DSL cable plugged into the Router ADSL Port and as a result a message will pop up during initial genie setup.

Steps to Fix Netgear router flashing DSL LED issue are

Fix Netgear Router Flashing DSL LED Issue

Step 1: The first step is to ensure all your devices are plugged into the phone line via DSL filter, including satellite receivers, and alarm systems. These filters hence will prevent any kind of interference with the DSL signal.

Step 2: If users are working with PHLO+ or line share ADSL then they have to verify that there is a clean dial-tone over the phone line. It is then plugged into their DSL modem. To fix Netgear router flashing DSL LED issue, users need to have a regular analog telephone and perform the test

Step 3: The phone cable which is there in your DSL modem should be plugged into the wall outlet. Now, try to bypass any available devices to avoid causing interference with your DSL signal. However, for better results, users should remove and re-plug their phone cable into the DSL modem. Also in their wall jack they need to ensure that the cable is securely plugged. The cable should ‘click ‘when it is pushed into place.

Step 4: As per as Netgear router support technicians, remove the DSL modem with its power supply into a different telephone wall jack.  Now, assuming that you are working with a line-sharing DSL, remember to turn off the DSL modem. The next thing is to listen for audio voices on the line.

Step 5: At last when you are conducting the test, run the DSL modem to MPOE which will eliminate all wiring issues completely if existing.

For more issue, connect with our technicians and bring future effective solutions at your desk!

Router-Customer-Support-Number

We are a group of expert technicians who are working at Dial 1-800-335-8177 Netgear router support number to bring effective solutions at your desk. Technicians are backed by in-depth knowledge about every minute to minute issue that arises within the device. Feel free to place calls and get world-class support solutions.

22Jun/18
Router Error

How To Configure TP-Link N Router into A wireless Access Point?

This blog is all about how to configure TP-Link N router into a wireless access point in few easy steps. There what users need to do is to connect the router to a TP-Link N router with the help of LAN port. Here your WAN port is not for any configuration process.

Steps to configure TP-Link N router into a wireless access point are

Configure TP-Link N Router into A wireless Access Point

Step 1: To configure TP-Link N router into a wireless access point, the first thing is to connect your computer to a second LAN port. This will appear on the TP-Link N router if users are working with Ethernet cable. Now, try to login to your TP-Link web interface via an IP address which will appear at the bottom side of your TP-Link N router

Step 2: Go to “Network>LAN” option which is there on the side menu and modify the LAN IP address of your TP-Link N router into an IP address on the same segment. This should be on the main router. The IP address here should be outside the main router’s DHCP range.

Step 3: Now, navigate to the “Wireless>Wireless Settings” section and try to configure your SSID. This is the same or may be different from the main router. Select “Save” icon.

Step 4: Navigate to the “Wireless>Wireless Security” icon and configure it. WPA/WPA2-Personal is the one which users should consider as a secure option.  Click Save.

Step 5: As per as TP-Link Router support service technical team, navigate to the “DHCP>DHCP settings and choose “Disable the DHCP Server” icon. Select Save.

Step 6: Click on “System Tools>Reboot” button and select “Reboot” to reboot the device.

Step 7: Work with your Ethernet cable to establish a secure connection with the main router to a TP-Link N router via LAN ports. Here, all other LAN ports on the TP-Link N router will now grant devices Internet access.

For more queries related to TP-Link router,s connect with our technicians for prompt solutions!

Router-Customer-Support-Number

Call us at Dial 1-800-335-8177 TP-Link router support number to experience world-class solutions at your desk. Technicians are qualified and hold rich knowledge to fix every kind of issue that arise within this router. So, for any issue, give us a ring and get a perfect blend of solution at your desk.

18Jun/18
Router Error

How To Fix TP-Link device Can’t Log Into Web Management Utility Issue?

The above problem may be due to physical connection glitch, technical issues in IP information and browser settings issues. Fix TP-Link device can’t log into web management utility issue with the help of our professional expertise solutions. For the customers who are not able to login their web interface of TP-Link, there are various ways by which users can overcome this issue.

Steps to fix TP-Link device can’t log into web management utility issue are

Fix TP-Link device Can’t Log Into Web Management Utility Issue

Step 1: Physical Connection:
  • The TP-Link router web-based management page is a built-in internal web server which does not need any internet access, but a physical connection between the router and the device is essential. This is when users are trying to log into its management page with. So, for wired devices such as routers and switches, it is essential to plug the computer to your LAN port by cable while ensuring that corresponding LAN LED Indicator lit up.
Step 2:  IP Information
  • To fix TP-Link device can’t log into web management utility issue, the computer must have an IP from the TP-Link device. This is because users should able to access its web management page.  Most of TP-Link Router devices will work with DHCP function in its default mode where it will assign IP Address to their computers or devices automatically. However, there are some Access Points which will not have a DHCP Server function working. So, here try to set up a manual IP Address for the computer device to access the management page.
Step3: Browser Settings
  • Now, put the “Gateway/router IP Address” into the Address bar. It will help users fix the issue completely. Although there are cases where another device will be needed or removal of the Antivirus software is needed.

Connect with us to explore world-class solutions at your desk!

Router-Customer-Support-Number

We are a group of expert team who is working at Dial 1-800-335-8177 TP-Link router support number to bring users effective remedies at their desk. Technicians are skilled and competent to deal with any level issue from the core. Place a call at our end and experience solutions like never before. We deliver customers adept solutions as and when in need.

 

15Jun/18
Router Error

How To Fix Linksys Router Not Found Error?

This is an issues which will appear when users are not able to get access to their router and there is a defect in LED lights of the device. Fix Linksys router not found error with appropriate guidelines available at our end.  Below we will apply steps to assist users overcome the issue in an easy manner.

Steps to fix Linksys router router not found error are

Fix Linksys Router Router Not Found Error

Step 1: The first and the foremost step is to have a check for your Linksys router’s cloud account. This is because there are times when users won’t be able to find out the router. So, have a check on its physical connection between Linksys Smart Wi-Fi Router and your connected devices. To fix Linksys router not found error, ensure that your Ethernet net cable is connected to the computer as well as its  another end is well connected with LAN Port.

Step 2: Now, the second step is to perform a thorough check whether the LED of your Linksys Router is blinking or not? If it is blinking then, make sure to make it into a stable state. Once done, it is confirmed that connection is settled down properly. If in case, the LED is not lighting up then the appearance of an error is due to technical issue.

Step 3: Finally, navigate to your ‘Ping the router’ icon as it is one of the best technique to check whether there is any communications issue between the computer and the Router? As per Linksys router support service team, make sure that connected device is able to send packets to the router and also is receiving this packet. However do ensure that the Router is able to send a proper reply to verify its connection.

Connect with our technicians to fix related Linksys router technical faults with world-class solution!

Router-Customer-Support-Number

We make our presence at Dial 1-800-335-8177 Linksys router support number 24/7 hours across the country to assist users in fixing up issues completely. Technical team is skilled and competent to deal with any level issue while they study the root cause of each of them. So, place your call to our technical experts and experience solutions like never before.