Monthly Archives: March 2018

31Mar/18
Synology Router

How To Fix Synology Router Cannot Connect To Internet Error?

The error occurs when the router is not directly attached to PC devices. If users have attached the Synology directly to a computer and are not working with the DHCP then, 169.254.X.Y address will appear. Fix Synology router cannot connect to internet error with expert guidelines by calling our technicians.  Below are explanations to get rid of this problem in few easy steps.

Steps to fix Synology router cannot connect to internet error are as follows:

Fix Synology Router Cannot Connect To Internet Error

Step 1: When users will click on the update, a control panel will appear on the screen where users will be able to view flag bouncing at them.

Step 2: The second step is to navigate to the control panel if it is visible on the screen automatically.  As instructed by Synology Router Support team, an option labeled as “Network” will be visible on the screen.

Step 3: users will see a screen pops up message which will tell them what kind of network settings they are. However, there will be two lines that are visible for users namely: The Default Gateway as well as the IPv6 Default Gateway.

Step 4: Now, a couple of things will start appearing. First one will be there is no Default Gateway listed which is of-course quite bad. To resolve this issue, click on the “Edit” button appearing just next to the “Default Gateway”.  It will appear as follows:

  • Once users have populated the LAN configuration, just click on “OK” button. The Network control panel will now appear as value.

Step 5: Go ahead and tap on “Edit” button with the interface highlighted. If users are having their Synology Diskstation set up to get its network configuration from the router then, it will come up with “Get network configuration automatically (DHCP) chosen for users.

Step 6: However if the default gateway in the previous step is not visible then, perform a deep check to ensure that the checkbox is selected to “set as default gateway.”

A word caution:

  • Users should not put in arbitrary numbers as these numbers will provide some different meaning. So it is always advised to keep the “Get network configuration automatically (DHCP)” checked.

Reasons to choose our solutions:

  • We make our best efforts to resolve each and every issue
  • 24/7 hours tech support engineers are available to assist customers
  • Expert, competent and skilled technicians
  • We do understand the needs of our customers
  • Customer’s feedback is always welcome
  • Highly focused in our work

Get connected with us to resolve issues confined to Synology router with appropriate remedies

Router-Customer-Support-Number

We are available for our customers at 1-800-335-8177 Synology Router Customer Support Number 24/7 to assist them with all possible solutions delivered within defined timeline. Technical experts are thorough and competent knowledge about every minute to minute issue confined to Synology router which makes them highly proficient to fix technical problems from the core. Feel free to connect us anytime and get hassle free solutions within defined timeline.

 

30Mar/18
Synology Router

How To Fix Synology Router Error 16?

This error code arises when trying to upgrade Synology DSM and there is not large enough space for the latest DSM to go ahead with the upgrade process. Fix Synology Router error 16 with expert guidelines delivered at Synology router Customer Support Number +1800-335-8177. However the issue can also be resolved by following a formatting process of all hard disks on the DiskStation and reinstalling the latest DSM.

Steps to fix Synology router error 16 are as follows:

Fix Synology Router Error 16

Step 1: Log in to your DSM with the help of admin account and navigate to the “Main Menu” section. Click on “Backup and Restore” icon to easily proceed with the back process of your data as well as system configuration process.

Step 2: As instructed by Synology router Support team, get access to the “Main Menu” icon and click to choose “Control Panel” icon. Now choose “Restore Defaults” option and format the hard disk by clicking on “format” option. Restore to factory default settings now.

Step 3: The next thing is to launch your Synology Assistant to easily install the latest DSM. Alternatively, one can also refer to the “Quick Installation Guide” that comes up with the installation disc for more detailed information.

Step 4: Log in to “DSM” mode with the help of admin account and go to “Main Menu” icon to choose “Storage Manager”. This should be done to create a new volume on a DiskStation.

Step 5: Navigate to the “Main Menu” and click to choose “Backup and Restore” option to restore both data as well as system configuration.

I hope these above steps will help you resolve this error code faster without any problem further

Top reasons to choose our solutions are as follows:

  • We make our best efforts to resolve each and every issue
  • 24/7 hours tech support engineers are available to assist customers
  • Expert, competent and skilled technicians
  • We do understand the needs of our customers
  • Customer’s feedback is always welcome
  • Highly focused in our work

Connect with Synology router expert technical team for prompt remedies to related issues

Router-Customer-Support-Number

We are backed by sound and competent technicians who are always a step ahead in fixing up even the most complex level issues that arise within it. Technicians are available at 1-800-335-8177 Synology Router Customer Service Number to assist users with all possible solutions available at our end. Solutions are matched as per the market trends while ensuring that they suitable for customers to apply too. Feel free to connect with us anytime and get these unexpected issues resolved completely within defined timeline.

29Mar/18

How To Fix Router No Route Found to Domain Error?

The aforesaid error arises when Simple Mail Transfer Protocol (SMTP) routing is not properly configured for the environment. Fix router no router found to domain error with our professional guidelines at Router Customer Support Number 1-800-335-8177. The following message however will appear in the debug logs as well as within the Notes Log (notes.log). An error will appear as a message: No Route Found to Domain <domain_name.com>. We have explained few fixes below to help you overcome this technical glitch in easy ways.

Steps to Fix Router No Route Found to Domain Error are as follows:

Router No Route Found to Domain Error

To resolve this issue, it is advised to follow below instructions explained by Router Support team that are quite easy for users to understand as well:

Step 1: Open up the “IBM Lotus Domino administrator” client and then, select your “Configuration” tab.

Step 2: The next thing is to click on “Server twisty” option which is found in the left panel and then, select “Configurations” icon.

Step 3: Go to the right section and double-click on your correct choice of server configuration document section.

Step 4: Navigate to the “edit” mode to select the “Router/SMTP” tab. Choose the “Basics” tab.

Step 5: Go to the SMTP which will be used while users are sending messages outside the local internet domain field. Now, select the “Enabled from the drop-down list” and save all of the changes. Alternatively users can also configure an Internet Protocol (IP) address or SMTP gateway for external routing. Repeat all the steps from 1 through 4 of the preceding resolution steps.

Step 6: In the “Relay host” for messages which is leaving the local internet domain field, simply type the “IP address” or the name of the SMTP gateway server which will be used for external routing. Save and close.

Why one should approach our solutions?

  • Award winning solutions
  • Small enough to care but large enough to deal with your problems
  • We deliver trusted and imaginative solutions
  • Customers can connect with us from anywhere
  • 100% guaranteed results
  • Customers’ feedback is always welcome
  • Solutions are value added and not bound with complications
  • Expert in handling even the toughest of issues

Connect with our technical team to get your router issues resolved

Router-Customer-Support-Number

We are backed by competent and skilled technicians who are always happy to assist customers in solving related router problems with the most appropriate remedy available at 1-800-335-8177 Router Customer Service Number. Tech support engineers are backed by top-notch skills about every smallest to smallest level issue which has enable us deliver right solution at right time.

27Mar/18

How To Fix Router No Internet Secured Error?

Have your system ever been detecting a problem where your system is directly connected to the Internet, but you can’t check any website? Well, this is one is really a serious problem during work. It’s quite a common but often emerges as a dissoluble problem. You’ll observe a very small yellow colored triangle symbol, and when you press on it, you’ll notice a text saying no Internet secured.

This issue happens due to various reasons, one of the most general being a particular change in your system’s configuration settings. Any alterations in your user ID, IP address, could be an obvious reason for your system’s router to experience issues relating to the Internet. Any type of program, like an update of the operating system of one computer, can be the reason for this error.

This is basically a Wi-Fi error which is most often confined to Windows operating system. Before it too much constraints in your working process, Fix Router No Internet Secured Error with appropriate guidelines at Router Customer Support Number +1-888-513-5817. However one come across few early signs such as failing to connect with the Internet soon after the update, flashing lights will appear on the device screen. So, luckily we have few advanced methods to correct the issue in few easy steps. We generally come up with using secured Wi-Fi connection in our home or in offices. Also, the error may arise due to invalid IP configuration process or may be related to the changed settings. Well, here is what users can apply to overcome the issue.

How to resolve the ‘no Internet secured’ issues?

There are so many strategies to resolve this issue. It’s a great idea to go through each of the given options because they have been proven to fix your system issues. It’s just that you have to check which works for your system.

As it is quite tough to pin down the exact reason for this error issue, you’ll have to try one or more of these solutions.

Set your WiFi connection properly

You can follow some simple steps below verify whether the settings of your Wifi connection is correct.

  • Tap on the Windows key and hold it for some seconds then press the letter “R.” In that run window, tap on “ncpa.cpl” option and next click on OK.
  • This effort will be an open the option “network connections” window.
  • Right-click on the WiFi and choose “properties.”Select WiFi connection first to do that.
  • Then look at the dialog box.

Renew ‘system network adapter’

An old-dated system driver can freeze your computer or laptop from reconnecting to the WiFi or Internet. How to fix:

  • Tap on the Windows key along with “R” and write “devmgmt.msc” in the Series dialog box. Tap “Enter” and this will launch the device manager window there.
  • In the same window, double-tap on “network adapters” to develop it.
  • Identify the network adapter that your PC is currently applying, right-click on that and pick “update driver software” option.

Modify the system power management portion

Another probable reason or cause for the “no Internet secured” problem could be due to improper settings of your system’s power management. To deal with this problem:

  • Click on the Windows key plus X to own to the list.
  • Choose the device manager and develop the network adapters.
  • Double-click on your wireless network and reach to the “power management” page.
  • You don’t have to check one option“allow the computer to turn off this device to save power”.
  • Reboot your PC and check if you can relate to the Internet connection now.

Steps to fix router no internet secured error are as given below:

 

Step 1: The very first step is to update your “Network Adapter driver software” to check whether it helps users to overcome the issue.

Step 2: Run the “Network Adapter Troubleshooter” as instructed by Router Support team to perform a thorough check whether this step resolves or not. Applying this built-in troubleshooting diagnostic process will help customers resolve issues with their network. To do this, click on “Control Panel”  and tap the “All Control Panel Items” icon. The next thing is to tap the “Troubleshooting” option” and  click to choose “Network and Internet” icon.

Step 3: If the above step also fails then, try your hands to change the “Adapter settings” option. To do this, select “adapter settings” option from the “Network” icon as well as on “Sharing Center” window. Then, open up the “Properties” option of the Network Adapter to easily locate the one which is currently being used. It is clearly visible as a Wireless Adapter. Users can now find whether the Internet Protocol Version 6 (TCP/IPv6) is listed right under the options displayed on the screen. Click to open it and then, uncheck to properly disable IPv6. Tap the “OK” button and restart your device to easily allow changes to take an immediate effect.

 So, why customers should approach our solutions?

  • Award winning tech support solutions
  • Small enough to care but large enough to manage every technical fault
  • Trusted advice with future effective solutions
  • We add value to your solutions not complications
  • Expert team is always ready to assist you in every possible manner
  • We are well known and reputed for our unique solutions
  • Customers’ burden are taken away from them by following seamless transition
  • Highly updated solutions are delivered
  • 24/7*365 days service 
Related Blog: How to Solve your Dlink error 0.70?

Call Us +1-888-513-5817 For Further Assistance of Router

Router Error

If your system has begun giving serious issues lately, then don’t worry. We will definitely help you to Fix Router No Internet Secured Error at the earliest. All you need to do is to call our Router Customer Support team and register your issues with us. It will probably take a minute to contact us. Our team contains certified professionals. They are available all around the clock 24X7.

So, dial our toll-free customer service number and talk to our Router tech support. We give you a guarantee to provide the best and affordable service. You can also write to us on our official email ID or talk to our experts directly through live chat. We will be registering all your queries or issues that you are facing and resolve them by getting in touch with you. We will always be the earliest support for you with the best possible resolutions.

23Mar/18
Fix Router Network Connection Problem

How to Fix Router Network Connection Problem?

This issue may arise due to various reasons such as obsolete network adapters, difficulty in rolling the network adapter, unexpected turning off the firewalls and antivirus software. Fix router connection problem with appropriate steps by reaching at Router Customer Support Number +1800-335-8177 for expert help.  So, we have steps mentioned to get rid of this error with appropriate guidance that are easy for them to apply as well.

Steps to fix router network connection problem are as follows:

Fix Router Network Connection Problem

Step 1: Have a check on why you are not able to connect with the router online. If it is the case then, try out some of the basic troubleshooting steps in appropriate way.  As per as guidelines by Router Support team, restart the modem as well as wireless router which will help create an accurate afresh connection to the internet service provider (ISP). When done, everyone will be connected to the Wi-Fi network. However this step may vary from device to device

Related Blog : How To Fix Router Error Code 10060?

Step 2: Unplug your power cable and modem from the power source section. However there are some modems which will exist with a backup battery. If unplugged, the modem as well as the lights will stay still. Remove the battery from the modem carefully. Once done, wait at least for 30 seconds or so on.
Step 3: If already the battery from the modem has been removed then, put it back in. However, plug in the modem into its power source. The lights on the modem will start blinking where users need to wait for a while to stop these lights from blinking.

Step 4: Plug in the router into the power source and then, wait for few more minutes for the modem as well as router to fully get it powered on. PC users should try to connect with the device again with a purpose to generate a wireless network report properly. It will help users diagnose the cause closely

Step 4: Go to the search box which is found in the taskbar to type in “Command prompt”. Press and then, hold “Command prompt” key to select “Run as administrator” icon and tap “Yes” icon. Now at the command prompt, simply type “netsh wlan show wlanreport’ command. The process will simply create an HTML file to help users open up in the web browser from a specific location listed under the command prompt.

Step 5: Do ensure that this problem does not arise with the cables, modems or even with Internet service provider (ISP). Now, type the “Command prompt” and press “Command prompt” key to select “Run as administrator” icon. Click “Yes” to continue further. Type “ipconfig” icon in your command prompt.
Step 6: Look for accurate IP address listed past by Default gateway. At the prompt, just type “ping <DefaultGateway>” and press “Enter” icon.

Step 7: Execute the Network troubleshooter followed by commands

The Network troubleshooter will assist users diagnose and fix common connection problems arising within the router device. Using this process will help rectify the issue easily.

Call us Router Support Number for immediate solutions to your router issues

Router-Customer-Support-NumberGet connected with our Router tech support engineers at 1-800-335-8177 Router Customer Service Number for world-class solutions delivered at your desk with suitable choice remedies. We are available 24/7 hours to assist users by all means to provide them the best possible remedies at your desk. Connect with us anytime and experience our hassle free responses.

16Mar/18
Cannot renew IP address Error

How To Fix Cannot renew IP address Error in Windows?

The error occurs with the router when users are working with Windows system at the time of trying to renew their IP address. Fix cannot renew IP address Error in Windows with expert guidelines delivered by technicians at Router Customer Support Number 1800-335-8177. Also, if WinSock configuration is found to be defective on the computer, this error may arise.  Users working with static IP address, in such cases renews will never work.

Steps to Fix Cannot renew IP address Error in Windows is as follows:

Fix Cannot renew IP address Error in Windows

Step 1: Obtain the IP address automatically: This clearly defines that even if there is a DHCP server on the network, it won’t work with a new IP address. Set your computer to easily obtain IP address from a DHCP server automatically by navigating to the “Start” icon, “Control Panel” section” and “Network Connections” icon. Users can go to the “Network and Sharing Center” to choose the “Change adapter settings” link.

Step 2: As suggested by Router Customer service team, right-click the “Local Area Connection” or on “Ethernet” icon.  Choose the “Properties” icon now.

Step 3: On the General tab, simply scroll down in the list box until users are able to see “Internet Protocol Version 4”. Highlight it. Tap on the “Properties” icon now.

Step 4: Now make sure that both IP address DNS server address are automatically selected.

Step 5: At last, try to work with your IP address and check whether if users are able to connect to the Internet or network or not. If this does not work then, users should ensure that there are software on the device that is blocking all of the ports on the computer.

Why customers should approach our solution?

  • Dedicated, expert and competent tech support engineers
  • 24*7/365 days assistance delivered to users
  • Industry-matched tech support solutions
  • Customers’ feedback is always welcome
  • Trusted technicians
  • Instant remedies delivered at your doorstep

Get connected with Router expert team for world-class solutions delivered at your desk

Router-Customer-Support-NumberWe are available for users 24/7 to assist them with all possible solutions to fix Router issues promptly. Technicians working at our end are skilled in handling every minute to minute issue arising within their router. Feel free to connect with us anytime at 1-800-3358177 Router Customer Service Number and get issues completely resolved from the core. We deliver users hassle free solutions within defined timeline.

12Mar/18
DSL Cable Error In Routers

How To Fix DSL Cable Error In Routers?

This is a blunder which happens when the curved link has organized LED line and it stays dark or is in flickering mode. So, Fix DSL cable error in routers with appropriate guidelines by approaching at Router Customer Support Number 1800-335-8177. However, it will never work easily with the channel or even with the line accurately. Additionally, it is seen that the web access has not been completely initiated in the client’s telephone association yet.  On the other hand, the wound link line LED stays squinting and also, will never turn out to be a strong one. However, our proficient expert group has discovered fitting remedies to get rid of the problem in much easy ways by clarifying every headway in subtle elements.

Steps to fix DSL cable error in routers are as follows:

Fix DSL Cable Error In Routers

Step 1: Verification is needed

  • The first and the foremost step is to confirm whether channels are precisely joined to the gadget or not? Ensure that each and every telephone is associated in the attachment which is marked as “telephone” in the channel. At the same time, the router is associated with the one named as “ADSL”.
  • As suggested by Router Customer Service team, have a check on whether are there any telephones as well as fax machines in the home premises? Do ensure that they are largely working with all the legitimate channels smoothly.

Step 2: Check for all telephone links whether they are connected or not?

  • Here the foremost step is to check whether all telephone links are being associated from the attachment or not and also, verify that whether it is named as “ADSL” in the channel or not?
  • The second way is to have a check whether all yellow ports are utilized only for neighborhood wired gadgets or not
Related Blog : How To Fix Router Error Code 3254 ?

Step 3: Verification is to be followed for synchronized line

  • The last stride that needs to be confirmed is whether the line is fully synchronizing in a great way or not by focusing on “contorted link” LED line situated in the front show.
  • Users on the other hand will see a squinting green light when they are making an attempt to synchronize and also when the procedure is finished.
  • Users will finally get to see a “globe” web LED which is visible in steady red unless the point when users have finished with setup process
  • After you have discovered that the LED line is appearing with a strong green light and again is visible with a red light so that users can work with the genie Wizard setup process easily.

Connect to our expert router technical team for instant solutions to every issue

Router-Customer-Support-NumberWe urge our customers to call technicians working at 1-800-335-8177 Router Customer Service Number to settle their related issues identified with the router while applying specialized glitches. Our group of expert team is accessible 24*7 hours a day to assist customers in overcoming their related router flaws. Call us now and experience our one-of-a-kind delivered at your desk.

11Mar/18
Router Error

How To Troubleshoot AP Error In Routers?

The issue arises because the device communicates access point in a wrong way which users are trying to connect to. Access point here will be the wireless dongle or any other device that you are using. Troubleshoot AP error in routers whereas we recommend you to approach at Router Customer Support Number +1-888-513-5817. Further if we see then, the AP won’t be in use because phone as well as tablet will be struggling to connect to the network. In fact, if we talk about the access point which users are trying to connect to then, probably it is indicating fairly weak signals.  We have infinite fixes to get rid of the problem that are quite easy for users to understand as well as apply.

Solutions to troubleshoot AP error in routers

Troubleshoot AP Error In Routers

Solution 1: Restart the device

  • Yes, there are times when users need to turn off and then, turn it on the device again which will work wonders
  • Now, try to restarting the device if you are able to
  • Sometimes a restart is all you need

Solution 2: Choosing a different connection

This is certainly the most simplest options which users can ever try to fix the problem as per the Router Customer Service team. While it is always not possible, but connection with a stronger signal will generally always be better to take a step ahead. However, it is necessary to remember that even if users are able to manage to get connected to the network, users  will be see this.

Solution 3: Move To Somewhere With A Better Signal

The first fix is certainly the easiest. But if there is no other way to resolev the issue then,  try to move the router closest to you.  This method is considered as the simplest one as moving your router to a different location in your home or office is considered as a suitable solution.

Related Blog : How To Fix Router Error 0x80040201 While Using Windows?

Solution 4: Uncheck the ‘Avoid Poor Connections’ Option

  • The ‘Avoid Poor Connections option on your phone is another option which is supposed to ensure that users always have a good internet connection. At the same time, sometimes if there are no other connections available or if you don’t want to use data, users may wish to find that a slow connection is better than no connection at all. To turn the setting off, perform below steps as guided:
  • Go to the “Settings” icon and click on “Wifi” icon. Tap on “More settings” option and tap “Advanced” icon.
  • Do ensure that you have clicked on “Avoid poor connections” is unchecked.

Solution 5: Work with the Static IP Address

  • This is another simple solution which will allow users to search for a proper network subnet as well as they need to find their network’s DHCP range.
  • Once done, just choose the IP address within the subnet and as well as outside the DHCP range. Now, enter your phone and then, perform a test.

Connect with router expert team  for immediate replies to your solutions

Router-Customer-Support-Number

Dial us at 1-800-335-8177 Router Customer Service Number for world-class solutions to every issue occurring within the device. We are available for customers 24 hours to assist them with all possible solutions delivered within defined timeline. Grab our world-class solutions delivered at your desk.

10Mar/18
Network Adapter Error

How to Fix Network Adapter Error?

A network adapter is a group of computer’s internal hardware to communicate over a network with other PC. It allows computer to connect with another PC or server over LAN connection. Here users will be taught how to Fix network adapter error in easy ways by connecting us at Router Customer Support Number 1800-335-8177. This article will further teach users the process to reset the network adapter’s software into its default mode. Well, the method is also known as “winsock reset”, or “comms reinstall” method. Applying this method can solve browsing related issues, particularly if the default gateway address is written as “169.254”.

Steps to fix network adapter error are as follows:

Fix Network Adapter Error

Step 1: Winsock reset in the Windows 10

  • Click on the “Search” icon located in the bottom left-hand corner of the screen and type your “cmd” command into the search bar as suggested by Router Customer Service
  • Users will be displayed a Command Prompt app which is considered as the best thing. Now, right-click on it and then, select the “Run as administrator” icon. Depending on the type of PC settings, users will be asked to provide administrator password before continuing to the next step
  • A black box with a flashing cursor will get displayed automatically which will be the Command Prompt and type the “netsh winsock reset” text. Hit the “Enter” key on the keyboard. Wait for your command Prompt to run the reset process. Once done, a message as a “Winsock reset completed successfully” will be displayed on the screen automatically.
    Restart the computer to finish.
Related Blog : How To Fix Router Error Code 10060?

Step 2: This is the second step where users will be guided to perform Winsock Reset in Windows 8

  • Here, one needs to move the mouse to the upper right-hand corner of the screen to ensure that the vertical menu bar is appearing. Click the “Search” icon when displayed.
    Type a “cmd” command in the search bar and then, hit “Enter” key on the keyboard.
  • Right-click the “cmd” in the search results for “Programs” and select “Run as administrator” icon. Again depending on the computer settings, users will be asked to provide an administrator password before proceeding to the next step
  • A black box with a flashing cursor will get displayed on the screen which will be again your Command Prompt. Type the “netsh winsock reset” message and hit Enter key on your keyboard.
  • Wait for a while to allow “Command Prompt” get displayed and run through the reset button. Once you are done, a message known as “Winsock reset completed successfully” will get displayed.
    Restart the computer device to finish.

Connect with Router technical experts for instant solutions related to router queries

Router-Customer-Support-Number

We are available for users 24/7 to assist users fix related issues occurring in the router device. Technical experts are highly qualified to deal with complex level issues arising within the router device. Call our tech support engineers who are working at 1-800-335-8177 Router Customer Service Number for instant solutions delivered within defined timeline. Connect with our team anytime and get hassle free solutions at your desk.